I think we are talking about different items. The one I replaced was the relay (fuse), you just need to cross match the numbers and amperage on the side of the relay you have installed now. It's...
Type: Posts; User: Bobbyf
I think we are talking about different items. The one I replaced was the relay (fuse), you just need to cross match the numbers and amperage on the side of the relay you have installed now. It's...
Have you tried replacing your injector relay in the fuse block? Mine went bad and at first it would only surge at those rpm ranges, then it became hard to start. The relay is fairly inexpensive and...
When running I only have the map showing on full screen. I'll try stopping the sonar next time I am out. It's just weird that the only thing I changed is the wire, which did up the voltage I am...
Bolts. I thought the same so I rewired it completely with all new connections at both the unit and battery and it still blinked out. It runs through a cut off switch and now I am thinking the switch...
After adding a livescope I just rewired all graphs (3 total) for each to have dedicated 10ga wire to battery and now the console Gen3 GPS maps blinks out only while running the lake for a few seconds...
When I lift it most of the movement seems at the hydro steering arm at the bracket. Those bolts are tight, so I’m thinking the bushings in there that are bad. The only loose bolts I could find were...
Thanks everyone, and agree on getting them all done at once. Thinking about taking it in vs tackling it myself since it don’t have a cherry picker to lift the motor.
After fishing some pretty rough lakes a couple 3 weekends in a row, I lost my 3 year old motormate going down the road (which had been solid) and it bent the brackets pretty bad so I started looking...
onewalker, They just called and said it's ready, with a 24 hour turn around. $375 or the axle only, my arms and hubs were good. Give Ron at McGill Propeller and Welding in Lewisville, TX. a call he...
I’m going through the exact same thing on a 2007 Zx-250 trailer. Had a torsion axle spin on me and rotate the wheel into the fender. Took it to a local shop and he was absolutely no help, told me to...
Mine did the same thing, right at 2000-3000 rpm it would kill itself. I replaced both the primer bulb and both LP pumps and it hasn't done it since. Figured something was not letting enough fuel get...