Search:

I think so, here is a screen shot:
548152

But, I'm not given a choice of the Water Pressure when the in the Mercury Screen. Here is the sequence I used to try to add it:
Started at this screen:...

Reviving this tread.

I finally got the VVL and my new Lowrance HDS Live 7 installed. Let's Review:

Before this install, I had:


Merc 150 4s, S/N 2B181067, with installed block water...

FWIW, I just warrantied a 46 month old X2 (Northstar) GRP 31.

Always charged it w/ my DualPro 15A Charger immediately upon return from any day on the water.

Guy at Batteries Plus said it was...

If you have these two units networked w/ ethernet, you probably should stay up at these latest software levels...having the Carbon way back at 18.x and the Pro at 23.3 might cause some networking...

Great News!

The NEMA-0183 output is on the Power Cord, so it was likely hardwired to your Speedometer.
Give it a shot and let us know how you come out...

yes, that would do it. You likely have SC-1000 System Tach and Speedo, based on your description.

You probably need to ensure NEMA-0183 is enabled on your new Lowrance...
4800 Baud, 1 Stop Bit,...

While I agree w/ you that Brunswick doesn't manufacture the oil, they do specify the base oil, additives, viscosity, etc...and have come to engineer it based on what they know about their engines. ...

Oh, Don, you better provide a disclaimer when giving this kind of advice:

CAUTION, OIL MAY BE HOT!


Thought this was a funny on April Fools day!

I figured it was that he started working on Volvo powered sterndrives I/O's, or maybe that Ferarri version :roll:

In all seriousness, cool story Don.

If a guy already owns the service manual for his outboard, does this manual add to the knowledge base available there?

Makes sense, but still seems like if a manufacturer (Merc in this case), is going to continue to manufacture and put in the market a device capable of connecting to a NEMA-0183 bus/devce, they should...

Agree w/ all that Don. Would be nice if Merc published what NEMA0183 Sentences the SC-1000 series can understand. Why put a “standard” input on your device and then leave it as a guess as to what...

I had SC-1000 Tach and Seedo (not Merc-Monitor), but was never able to get Depth info on it (MercMonitor may be different).

I believe I enabled:
RMB, RMC and that took care of Speed, Time,...

I think you can find a New Live 9 for around 1k right now...and possibly used for 700...

Too bad we all can't live near THE DON!

Interior of bilge and such is coated over the raw glass, right?

Need more info:
2D or SideScann transducer?
Do you want it to read on plane, or just while scanning...

My Reata has two 2D transducers: one is epoxied in the hull and shoots through it, reads...

His diagram indeed shows the J-Box and the SC network in the lower left corner, denoted by (i)...Assumption in the diagram is that there is a SmartCraft network on the other side of the J-Box, no?

The issue is the paper based cap washer/seal.
They don't leak until the foil seal is broken.

Like you, I try to premix the cocktail (QuickKleen and QuickStor/QuickKare) so its easy to just dump...

Yes, has the instructions w/ 90-8M0127924.
Yes, all the kit contents are present as you describe. Including the weather cap on the power connection to the VV Display, which will go unused in my...

I mentioned in Post #13 kit came with P/N 8M011670:


Has the classic female purple SC connector labeled J box on one end
Has a barrel connector to go to VVL labeled VVLink
Has a female...

Yes, have a J-Box at dash, mentioned that in post #13, that is where my SC-1000's are plugged now.
Realize I can keep them and the temp, but have no room at the helm to mount them after this mod,...

VVL ordered from Cabela’s (because I received a Bass Pro gift card from work), and Their guys are not super experienced with this stuff…I can call again, but didn’t get much love the first time.
...

Ok, another question has arisen on my quest to replace the SC1000 System Tach and Speedo w/ VVL and an Lowrance.

Admittedly, I am not at my boat right now, as it is in winter storage, but I am...