Thank you!! It came with a 26 Ballistic gonna try that first. I do have a 26 trophy to try also. Have 5 props to try out.
Type: Posts; User: 87GT183
Thank you!! It came with a 26 Ballistic gonna try that first. I do have a 26 trophy to try also. Have 5 props to try out.
Thank you!!
Getting ready to put a 1996 225PM with a bobs lower on the 95 209 SC Gambler. What would be a good starting point in prop to pad?? Thanks y’all!!
Looking forward to hearing some #’s.
Thanks. I was looking for that S# tag and found some melted wires that were touching the block from the trigger. Going to rewire those and check all ignition wires. Then lake test.
Number plate is missing. From what I’ve been told there is a tag somewhere on the block with it stamped on it. I’ll just have to look over it.
Thanks! What is the part number for that stator? 40 amp.
Got a 1995 200HP 2.5 XRI Fuel injected. Will not get on plane. Will rev to 2100 RPM’s and no more. I tested the Stator and trigger per Mercury manual. New fuel pump, bulb, all gas lines new, all...
Thanks!
Currently running a Yamaha 300 HPDI on an 88 206, 6” plate with a Razor 27 worked by mark fastest to date is 87 and some change. We are thinking of putting it on a 95 209 single console with 10”...
Looking for drivers windshield for a 95 209. Any of you guys have an extra??
NKY he said he caught it on the south side point off the Fairfield causeway. It a good spot that has always produced. I hope we can get 5 like that this weekend at Geist!! Haha!!
Dad restored his 88 over last summer and he finally got the seat and decals finished.
http://i182.photobucket.com/albums/x71/emwwicker/Mobile%20Uploads/image_zpshscxgxte.jpeg
...
Dads 6lb 15oz from Brookville. Not bad for his first fish of 2016.
http://i182.photobucket.com/albums/x71/emwwicker/Mobile%20Uploads/image_zpsh27enyjf.jpeg
I got a 92 bullet cc.
Well I've dicided to sell it!! Going to carpet it and finish rigging it. Getting married in September and I want another bike.
As soon as I get some time to take some pics I'll post some. I got a lot of the wiring finished. I just need carpet and steering hoses. Oh and passenger seats. I got to get the Allison bucket covered...
IM me your number. I've had about 10 phones in the last 2 years. As soon as I get my motor hung I'll send you some pics!
The CC, dad will be bringing his Gambler and my brother will be bring his CC dyna trac.
Damn Mike I keep forgetting about that. We will be up again this year. When? Really not sure! I'll be putting this CC together and dads gambler is getting another facelift. Hopefully it will be July!
I'm picking up a 20 CC this weekend and I am needing some pics of how the rigging is ran and how the control box mounts. I've been looking through pics on here and Google and can not find any pics....
It rubbed 2 quarter sized holes at the 2 front corners. I can't find any pics but when I get on dad's laptop I'll look and see if ther is any on it.
The tank under the seat had moved around and rubbed a hole through the glass. Caused a lot of rot!!
The rear tank is 13 1/2" tall, 32" wide and 16" deep.
I'll see if I can get the pics of both the 206 and the 183. I'll have to do some searching but I'm sure I'll find them. I believe the tank is a 27 gallon, I'll get you the dimensions tomorrow. We...
Bigmess; thank you very much for the jacket!!!! Dad loves it... I reall appreciate it!!!!