Search:

Well that saves me some time...thank you :smile:

And for the record, I never have with other units as well. Just thought I'd see if there's some new thoughts to this concept.

I'm in the middle of installing my 106sv Ultra and LVS34/GLS10. Both have that external ground spot on the cases.

Do you folks actually use these?
Do you ground the head unit too?
Do you ground...

Funny...I started installing mine tonight and needed this same info. I believe I saw a 14 on it in very fine print.
I'm going to get a heat splicer that drops from 14ga to the 8ga that I'm running...

Got it...it's a fuel demand valve

2012 189 VLO
Last summer I noticed a fuel smell in my lockers. Ignored it; it's worse this year. I removed the rear storage bins and livewell to get a good view and it looks like there's a small...

I already have Mega360 on an Ultrex and just bought FFS LVS34, but want this on its own mount/pole. I have a Tackle Shack pole I want to mount to the TM.
Has anyone done this?
Tips and things to...

Looking for results here too. I'm mounting the lvs34 on its own pole and have mega360. Trying to figure out the best way to do this.

Thoughts?

I'm in the process of adding FFS to my boat. I want it on a separate pole so I can look in other directions of where my TM is pointing. That said, How do you mount it so there's no blockage from the...

Thats great guys...thank you
I'll do a voltage drop check first.

Do I have to go directly to the battery, or can I use the factory spade plate that's in my bow? There's a power plate, if you will, with around 4-5 hot spades and 4-5 grounds for adding things like...

Got it; thank you both!

Thank you; if I didn''t want to link to another head unit, can I go right to the 1 unit without the black box? Or does the ducer still need to go to the gls10 and then to the head unit?

Maybe I'm reading things wrong but do I need a black box with a 106sv with either a 32 or a 34?
I'm purchasing things now, getting set up and this has me a little confused.

I think I follow you Wayne; thanks again

So does the Mega360 need another heading sensor?
And I was under the impression that the heading sensor for the Ultrex was just a heading sensor and had no capabilities as a gps source.

Helix9 G3N Mdi
Ultrex with IPilot/Link
Mega 360

I have the Mega360 all installed, powered everything up, started going through the instructions on setup.
I printed the instructions and on page...

Very cool thought! I'll try it the next time I'm out!

Got it Mike; thank you!

Thank you
Can you search the waypoint number? I don't have them named

I have a Helix/Ultrex with I-Pilot/Link and I use the GOTO feature often to circle a hump, lock me to a waypoint etc...
When I go to find the waypoint I want to circle, I have to down arrow the...

Absolute frikkin' genius

I just ran out, did as you described and it worked as described!
I can't thank you enough. I've said this before but you always have a spot in my boat if you're ever in...

I updated my Helix10 G2 from 2.110 to 2.280...all went fine

I'm installing a Mega360 up front on my Helix9 MDi G3N so I wanted to update that one from 2.280 to 2.760
I formatted the card to clear...

Good idea on the instructions. I did this and picked up a couple more tips on installation.
Thank you

I know this should be child's play but I just received a used Mega360 I bought from a guy. It came with all cables, mounts etc...but the power cable ends were cut off (just needs new flat spade...