2013 ProXs ECM $300 text me for pics 352-339-4711
Type: Posts; User: Joe72481
2013 ProXs ECM $300 text me for pics 352-339-4711
I’m currently trying to find out what adapter cable I need to link my Minn Kota Fortrex Us2 with a built in transducer to my Lowrance elite 7 (older model) it’s the 7 pin blue connector on the unit....
It’s tuff out there this time of the year especially bank fishing. I’ve been fishing out there for years and this time of the year most tournaments are won on drops and brush piles
Does anyone have the part # and best place to buy online? Thanks in advance
I’m also in, I live in Gainesville and have been fighting the spray battle for several years I also have friends who be willing to help. I have several pictures and videos of spray boats and them...
I will double check water pump today
Well I replaced the gauge and hose from motor to gauge, still no change......getting pretty fustrated with it now.
I was thinking it would hot with only 8psi but no alarms or is my motor hot to touch. Im really thinking i have a bad gauge. At idle tge gauge doesnt even move. Just order a new one so will see
So i raised the motor up to a 1" above pad and still only 8psi at WOT,dropped the plate back to 1/2 below pad and i get 12psi at WOT. I also shot air through the water pressure line and cleaned the...
Also changed the Impeller back in march
I clean my strainer twice a year due to fishing in muddy lakes. A restriction somewhere else is possible. And yes 10 psi WOT. I will check pad height but im pretty sure its even now. Thanks for all...
I was thinking the same thing but logic tells me if i have little pressure even with pad that it would be less 1" above lol
Yes, it has the two big hoses at the top i assume thats what it is.
My setup: 20XDC, 225proxs, 27P Hydromotive, 12 inch set back Hydrodymanic B2. My problem is I just got my LU Gen 2 TM back from Bob's who installed a Big foot low water nose cone. I figured setting...
10-4 does anyone know the NGK part #
Also primer bulb is full and not collapsing, I always pump it prior to initial start in the morning.
I have a 2013 Pro xs MN: 122p73bD SN: 2b020243. Since I've owned the boat I've noticed a slight hesitation/misfire at idle. Thinking the plugs and fuel filter needed to be changed I replaced both,...
Never thought of that, but it makes sense
Croxton fixed it the first time since then it's been a local repair shop. The prop was bought brand new from Jack Marine
All right guys I need everyone's opinion, setup: 20ft bullet XDC 225 pro xs, 14inch setback, Gen2 Torquemaster lower unit running about 1inch below pad (that's has high as she will go before losing...
Model 1226p73bd
Serial 2b020243
I have a 2013 225 ProXs Im having a problem that only happens the first time I try and get on a plan in the morning once it happens the rest of the day it never does it again. She starts up and idles...
Replaced the primer ball because it would stay primed or even get hard, after replacing still not cranking not sure what it is now
I have a 2013 225 pro XS that has a intermediate issue it first started a month ago when I started to get on a plan and the motor hesitated and acted like it wasn't getting fuel, this happened a few...
Yes it's got a low water pickup, going to try a few different props out this weekend