Search:

I took it apart last night and you guys are right the threaded shaft was dry after a good lubing its way better. The new one should be here today so that was just for experimentation.

thank man. I ended up ordering a 1200lb but I see what your saying and that's probably all I needed to do.

My Stratos trailer has a Fulton 1000 lb jack.
Its about done and I want to replace it. It has one bolt in the center and i want a bolt on replacement.
Anyone here have experience with these ? ...

I've never saw these before. I just ordered some to try. Thanks for the tip.
I also agree with DrewFlu33 . I like the keeper on the shank not the screw lock type.
For those who have used the...

You need to find out if its sparking ... looks like no to me. And yes that'll be your problem if it isn't.

Tatula Elite or Curodo 200M You wont go wrong with either.

Ok guys right or wrong I used Starbrite marine sealer wax (that's what I had) then 2 coats of the Turtle wax hybrid ceramic.
Its about as slick as youll ever get one I'd say. One thing that...

Yall think the one click up is because of trolling motor angle? Just talking here but I know on some boats the motor shaft is tilted back.

Thats the answer I was looking for thanks man . Ceramic it is

Guys I've never used any of this stuff. Always been a wash and wax guy but now with all these ceramic products available I want to give it a try. I just washed my white fiberglass glass boat using...

pm sent

I have a P/F and a tatula Ct with a long cast spool . maybe ill swap and give it a try.
From what I can tell the braking systym is a little different on the P/F
I can say for sure Ive used...

Are yall saying you can purchase a long cast elite spool for Elite P/F and it becomes an Elite Long cast? Same other than the spool?

Same on power side? Place the wire to the positive on the battery and main power to the fuse panel with the meter in between?

Alright I haven't had time to do much but I at least tried what Bill said (didn't blow you off Don just haven't had the time yet) and connected my test lead to the negative on the battery ---to the...

I made up a ground wire and connected to the battery with an alligator on the other end. Tried connecting it to every gauge, switch , light ground connection or anything else I could find. Did all...

Thanks Don Ill give that go tomorrow.

I've chased every wire a can and still no luck so far. Ive got it narrowed down to the nav light switch at the dash. Just to be clear this boat wiring is un butchered and looks as good as you'll ever...

I have the 794 Found it to be a little stiff. How does the 794.5 compare to it?
sorry mine is the fury 795sb

Only 2 hooks? blah that sux.
In my limited experience Im finding if I use different size bait usually they'll bite the biggest one. I probably would use the bottom 2 with the largest bait .
...

I was thinking the load had to be minimum on those lights especially with only the front one on. When you say clean ground for each . you mean for the lights?

Ill start searching grounds .

Napa 7234 commercial 1000cca 185 reserve capacity. Battery is connected as described with flange nuts. was always an issue before this battery too. Ill keep searching. omly changes when i flip...

Not sure if this is the place to ask but I know you guys know these things.
This has been happening every since I've the boat (2 yrs) so not a new issue just one I've not addressed.
I notice...

I ended up purchasing the Cashion . After 2 fishing trips catching a fair amount of spots and hybrids I like it much more than the Dobyns Fury . It has a much more parabolic type action.
this let...

I have a Dobyns Fury FR 795SB which is ok but I'm looking at these for A-rig.
Anyone here have experience with either?