1999 20' Dual Console Rocket, stock SHO 200 ---- 73 mph fish loaded. tour troller, 3 batteries, full tackle, with passenger
Flashed with same set up, 84 mph
Installed ultrex, lithums, and still...
Type: Posts; User: banchee6
1999 20' Dual Console Rocket, stock SHO 200 ---- 73 mph fish loaded. tour troller, 3 batteries, full tackle, with passenger
Flashed with same set up, 84 mph
Installed ultrex, lithums, and still...
Im running a Flashed 200 SHO and have a Lowrance HDS 7 Gen 3 that is my outlook monitor for the motor. Was running this weekend around 78 mph @ 5300 rpm. Had around 19-20 psi of water pressure. ...
I have close to the same issue. My down works all the time but my Up button works sometimes. Usually it works about three or four times, wont work for about five or six downs, then start working...
The Rev limiter on a SHO is 6400. You want to be as close to that RPM as possible.
Also, make sure you lower unit stay full of oil. Most of the seals are facing out on the lower unit, which is great for not letting water in, but bad for letting oil out. if you get low on oil, the...
I been torquing mine to 100 ft lbs.
SHO's do not like to run hot. That will ruin your day quickly. Cool it down as fast as possible. I think the bearing issue was corrected in 2013. i have 460 hours on my 2012 and i run it hard. ...
I get about 25-31 psi. You have to drill the fitting out so you get the water pressure from the block instead of the water tube that brings it to the fitting. Simply remove the fitting and drill...
I have a new set of 8' sportman II and not sure what my issue is. I have a set of foot switches in the front, the dash switch on the dash and a remote. I cant get them to all work at the same time....
Problem is which unit will it be compatible with? Will everyone have to go with Live units to link it together?
So what should i set it to on the high side?
I am having a few issues with my SHO and was wondering if you could help. Motor is a 2012 200 hp with no flash. Just switched over to NMEA thru my Lowrance HDS7 gen 3. Everything was looking good...
Which Transducer comes with a Helix 7 SI Gen 1? Need a replacement for mine.
Thanks for the advice. I will hit Brian up and see what he has in mind.
I sure wasn't me, i just bought this boat about 3 months ago. Best purchase i made in a long time.
Considering changing props and not sure what to go with. Here is my current set up:
20' Rocket Dual Console Boat ( boat weighs about 1300 pounds lite)
200 V Max Yamaha (2 stroke carb motor)...
Going to mess with it tonight and hopefully i can get the other power wire ran so i can get everything off the trolling batteries. Thanks for all the help. High water here in louisiana, hope i can...
well first trip out and the batteries were dead by 10:45 am. needless to say im glad i brought my jump box with me. Added a 34 agm battery to crank my motor and run my jack plate as of now. my...
I have a 24 volt motor guide x3 with two HDS7's Gen 3's on my boat with all the other accessories (pumps and misc) all hooked up to two batteries. I have the trolling motor in 24 volts and the rest...
heard he was ready to sell, send me some info, i have someone else looking for one as well.