Search:

What kind of speed are you getting and what is your PTP? I think you are running a 150hp motor right?

what is your exact setup with that 175? jackplate? ptp? rpms? I am interested in those props but was the same as you, skeptical.

I think i should be getting 57 or so with me and tackle, 55 or so tourney load w/ 2 passengers. But something isn't right. My old VMS prop only ran 5100-5200 trimmed all the way up, they prop is...

The 150 has a 2:1 gear, 175 has a 1.87:1 I believe so Jared recommend need the 23p. Just ran the boat over the weekend at 3.75" ptp. 5600 rpm, 55.8mph just me with full tank of gas and gear. Only...

I called Jared and he sent me a 23p TRO4. tried it at 4" ptp with myself, full livewell, 3/4 tank gas, and half of bass pro and got 56.2. Raised it to 3.5" ptp, same setup but add my 117lb wife and...

What prop are you running? let us know when you run the TRO4. I have X19 with the F150lb motor, not impressed with performance thus far, Michigan Wheel Rapture 23p 55.7mph gps, lots of slip. I...

I had that same prop from xpress stock on my x19 but in23p. that ofx prop has medium bow lift and medium stern lift characteristics. Thus, it doesn't like pad hulls because it "pulls" the boat off...

made adjustments to the boat

Picked up a yamaha m-23 prop. 3.25" ptp, cooler full, full tank gas, half of bass pro in the storage boxes, and me, 57.6mpg gps. Starts to chine a bit right at max...

see above

a 10" jackplate on my x19 made such a chine walk I said prayers, I went back to 6". No way am I going to 12". I do not see how you boys do it. and yes, my motor was lifted as high as the plate...

throw the 10" jackplate on craigslist, you need a 6", the 10" puts the motor too deep in the water and it needs more than the plate can offer in lift. the transom angle on this boat is too steep off...

2017 X19 pro dual console
2017 Yamaha F150lb
10" Z-lock jack plate
23" powertech
3.5" below pad
55.4 mph but its a wild ride

took back to dealer, switched out to 6" zlock jackplate and now...