If you have an older Bass Cat with the bench seats, I would advise not to upgrade to the bucket seats from BC. Even though it says you can do this upgrade on the website, the seats do not line up...
Type: Posts; User: snapshotmd
If you have an older Bass Cat with the bench seats, I would advise not to upgrade to the bucket seats from BC. Even though it says you can do this upgrade on the website, the seats do not line up...
Working through this myself. So, in terms of cables, can I use the small connector marine cable to connect the LS blackbox to the GMS 10? Then use large connector cables to connect the graphs to...
I've been dealing with this exact issue. They're sending me a new wire harness for the steering servo. Looks like a production lot defect. I got mine mid-Aug.
I'm looking to put a hydraulic jack plate on my 2000 Pantera Classic. I have a CMC 5.5" JP now, but Bob's Machine Shop site has an 8" hydraulic JP that is specialized to Bass Cat. Can I put the 8"...
I'm trying to figure out what to do for my high power needs. I am running the following off of a Group 31 wet cell Dual Purpose battery,
Livescope
Three 9" chartplotters
Live well pumps
Power...
I'm in tidal waters, so I guess if the tide is on the rise, I'll tie up.
Green flake all day long for me!
By sandwiching your mounts, you've effectively added setback to your rig. Theoretically, you should raise your jackplate to compensate.
Has anyone had their boat float away when using PP or Talons? :laugh: I found a guy on YouTube have this happen to him.
I think you would have to save your waypoints to a SD card and use a converter, like GPS Babel, to convert to a .GPX file, if the HB files aren't already.
3x. All while trying to save gear. Twice in the dead of winter. Always have a spare change of clothes! I should probably change my handle to "butterfingers". :laugh:
Getting ready to pull the trigger on a EC 93sv. There is a rebate if I get the Ultra maps. Are the Ultra maps worth getting?
Agreed. The next time you change your carpet, you could fill with epoxy like MarineTex to make more permanent.
What about using wire loom and zip ties? I'm probably going to keep my CV52 on my TM, so there will be 2 cables side by side.
How are you mounting the GT30 and 34?
I've had my EC 9 Chirps fall off twice; once per unit.
You need to adjust your contrast / brightness settings on the down vu. Looks like you've got the brightness cranked! I'm not sure what you're looking at but the fish you see are not bass.
I'm considering the Bounce Buster Kit for my X5. I actually was going to get a Troll Tamer, but I only have 3.5 inches clearance between the deck and the hinge on my TM. Since I have to step on the...
...or maybe it's because the tail hook is dull?:stirthepot: On new KVD hooks, I notice both hooks are in the fish. KVD himself recommends changing the hooks out after every 3 fish.
Would I be able to use the new UHD transducers, like theGT34UHD-TM, with an EchoMAP CHIRP 9*sv unit? I currently have the GT30/GT8 combo. I figure since I would probably get a UHD/Ultra unit w/o...
SamMule, do I need to get the GLS 10 Black Box to use the LVS 12 with the EchoMAP Plus, or Ultra?
I don't use the Ethernet port; I use the blue & brown Rx/Tx wires bundled in the power cord. I see that the Plus have the same wires, but label them for NMEA 0183. Just checking to make sure these...
Doesanyone use an EchoMAP Plus and a CHIRP in their setup? I have two CHIRPs set up to share waypoints byconnecting the blue and brown wires on the power cable between the units. Iwant to get...
Following. I've got a 2000 PC, and the console layout is very limiting :crying:. I'd like to have more than one 9"+ monitor at the helm.
I'm not sure I understand the relevance of the question. The units will operate as individual units. If you're only sharing waypoints, you don't need a special network cable, just any 2-conductor...