Search:

I also have the 12' Talons and love them. Have had many people fish from the back and they don't ever complain about them. But buy the tilt brackets though. I have been to some places where they...

Why not get a wet/dry vacuum and vacuum the carpet first before placing fans in it. It should not take hardly anytime then to dry. That's what I do. Plus it also gives you a chance to clean the boat...

I've got a 2004 NX 882. Love the boat. But the under seat cooler sucks really badly. I even noticed that the middle seat is is so wide that the passenger seat that sits on top of the cool which is...

no mine just was held in with glue and 2 screws. The new one fit in the exact same place and same holes. Just used the gasket and Marine Glue.

super nice install man...Looks really good.

Looks good man...keep up the good work.

Looks good

no what i did since i didn't use the green wire that is supposed to be for the alarm for when you crank the boat I used that wire that connected it to the positive wire on my Nav light then took the...

Awesome job man

Thanks man. I bought the led off amazon. And cut and made them myself and bought double sided gorilla tape and stuck them to the top cover.

To be honest man its a personal preference. Mine was that same way... But I did mine in the middle the whole way. Had my cousin help me and had him hold a few to give me an idea and I really liked it...

When I did mine I kept it in the middle of the gunnel.

Thanks guys. What I did was found a drill bit that was very snug and then used a socket to tap it in without damaging the lights

Thanks alot guys. Well the way I wired this other people may not agree with or like but i didn't want to run extra wire so since i don't use the green wire that connects to the warning chim, i...

if you did just make sure you keep a rope tied up to it. i don't see a problem with it tho.

I finished up wiring up both talon lights. I wired one to the anchor light and the other I wired to a toggle switch so I can have one or both.
...

Well I added some led's to the top of my talons. The talon behind the driver is wired to come on with the anchor light but the other is wired to come on with another switch. So I can have both or...

This is where I placed mine
http://i1379.photobucket.com/albums/ah123/Jared_Sasser/Camera/20160620_204146_zpsah1ztj4c.jpg

here ya go

http://i1379.photobucket.com/albums/ah123/Jared_Sasser/Mobile%20Uploads/20160708_185250_zpslqgy7bat.jpg
...

Just added a led strip around the top plastic piece... Its alot brighter than the factory light pole.

I just put this on tonight what do y'all think
http://i1379.photobucket.com/albums/ah123/Jared_Sasser/Mobile%20Uploads/20160707_230747_zpscbij9pez.jpg
...

on this setup we used 11mm bolts with lens. The switch that he used was his factory aux switch. And he bought a dimmer from ebay which works really nice but was a little bulky to me.

I ran mine on the cranking battery from my master switch on the fuse panel to a 30amp relay to turn them on and off when when I turn on my master power switch.

thanks guys...I'm really liking the colors.

Thanks guys...I really like the lights...I'll try and get a picture tonight of them Dimmed. These colors are really easy on the eyes. I really like them. Can't wait to try them out at night on the...