What is the serial number?
Type: Posts; User: ernie hearn
What is the serial number?
What is the serial number
With the NEMA you should have the power converter connected to it. You will need the adapter cable 8M4004174 to do down scan and sonar. Both HDS need NEMa cables. Able up transducer in sonar setup...
Will the transducer give you down scan?
You might check the thermosats. I had a piece stuck in one and not letting it run right. not warming up.
getting full trim and and good left. great hole shot, even when tanks are full. it does not matter where you set the jack plate, high or low. I have an appointment with a different dealer Monday. we...
prop has been B&B by Mark. boat has been to the Triton plant. Motor is new. It did this on the old 250 and the 225.
always been this way. and yes it has a hot foot. it is adjusted to max throttle
2007 triton tr21 x2 with a 2118 mercury 250pro xs. 24p fury. only turning 5000 rpm know matter what height. fuel lines and bulb have been replaced. has anyone had trouble with the pickup tube in the...
what are you trying to get out of your boat? the x2 should not have a handling problem. I am running a 2007 tr21 x2 with a 250 pro xs and a 24p fury work by Mark. Great hole shot with two guys and...
If it just started you might have to have the TM head rebuilt. Brushes to amatuer contact can cause a problem.
I have been running Trojan batteries on the TM sense 1998. The last set of three have been in my 2007, for 5 years and are as strong as they were new. They have never been out of the boat. I live in...
Thanks for all of your help. The insurance paid for a new lower unit. I found a hole cover missing on the lower cowling. I replaced it and the lower spark plug wire and the spark plugs. The motor now...
I have a hydrolic plate and this is the best I can find. also trim the motor up all the way and bump down one. It might be slower because of the fifth battery.
Update on issue. I found a plug missing in the lower cowling, letting water in when stopping or backing up. This had caused the lower plug and wire to be bad. Thought dealers would have caught that....
Who is running a tr-21 x2 and will help me with a real setup and not some off the wall dreamed up tail. I need real deals not, 250 Pro xs running 6800 RPM stock at 80MPH. I need real deals. Thanks
It is good to see a very honest fisherman. That is a good speed for that boat. I would like to know your setup.Prop, pad, rpm, and load. I upgraded to a 2012 250 pro xs and had Mark work the prop. It...
Tell me about strange. It, at times is like I am dragging an anchor around. If you look at the pics, the only damage I see is a tooth off of a gear. Almost like metal fatigue. A few scratches on the...
I don't know what boat you are running. This one seems to be a different beast. My old one, a TR-21 had a 225 Opti on it with the 26p Tempest and did turn 5800 rpm at 73mph. Not this one. The 26p...
I took the unit to a different repair shop. They said the prop shaft had .08 runout and was within specs. The other shafts showed no damage. I am trying to download some pics.7973279733797347973579736
Yes. I am sure it is a 24p Fury. I have tried a 25p Fury and only pull about 5100 on this boat. The speed also drops to about 59. The boat was taken to Triton and checked for hook but it checked ok....
The boat is a 2007 Triton TR21 X2. I turn 5400 at 65mph GPS. Loaded.
Plastic
To settle this issue. Yes I have a lot of props. This is the only one that I have used on this motor. It was worked but Mark and a great job. I am going to be sending it back to him to be checked....
I have a 2012 Mercury 250 Optimax Pro XS that I am being told has the lower unit blown away because I hit something. The prop is a 24p Fury and the lower unit is the new standard one, not TorqMaster....