searching craigslist I found a 2001 225 HP that needs a lower unit, I also found a 2001 150 HP lower unit. Are they compatible? if they are not compatible what HP would work on the 225?
Type: Posts; User: tincan86
searching craigslist I found a 2001 225 HP that needs a lower unit, I also found a 2001 150 HP lower unit. Are they compatible? if they are not compatible what HP would work on the 225?
Can someone tell me what length throttle cables I would need for a 1993 19SC? the boat didn't have the cables in it when I bought it and the ones I had are way too long
What kind of speed should I expect from a a 2000 skeeter zx202 with a Yamaha 200 on it? I'm going to test drive one this week and would like to know what to expect while driving it
I am looking at a 2000 model Yamaha 200 Vmax. Are there any issues I need to be aware of going into it? I don't want to buy something that has known issues that I didn't know to check for
I am looking at a 2001 nitro CDC 911 is there anything in particular I need to look out for? This is the first nitro I have ever looked at so I dont know of any past issues. Motor has 140 hours on...
I am thinking about doing the same thing, my ranger windshield cost me a fingernail last week and who knows how many gallons of fuel traveling to the lake
Update, turns out the entire housing for the impeller needed to be changed. the housing and aluminum cup were melting together
I picked up a new to me boat yesterday put a new water pump in it blew out the lines from the pee hole had good air flow at lower unit and it is still not peeing.
Also I smelled smoke not...
I am curious if a power head from(1995 Johnson j200txeoc) will fit on a 1987 evinrude 150. My motor is a long shaft and my buddy is getting rid of his short shaft which would work better on my boat....
Thank you so much, I spent several hours messing with it last Saturday and could not figure it out.
Thank you so much, I spent several hours messing with it last Saturday and could not figure it out.
I recently had an issue with my trim harness where is plugs into the relays, can someone tell me where each wire goes on each relay I will have to get the motor info tonight but it is a 95 200...
I have a 1994 Johnson 200txerk I believe is the model number, I am adding a kill switch. My question is what two wires do I need to wire it to?
I am looking at a new motor it is a 1995 Johnson Venom 200 hp the owner says the compression is 82-85, these numbers sound low to me am I wrong? What should the compression be at?
How can I get my rods to lay flat on the front deck of a ranger 497VS. I remember seeing a compartment that someone made to go into the front of their console but now that I am looking for it I cant...
that is correct OMC I thought I put it in but I guess I didn't
where can I find a crankcase cover for sale?
good looking boat
The block is still good I have had two people look at it, both engine mechanics that can't believe all I need is the pistons. the walls and heads are not damaged
If I was to do the work myself what parts besides the pistons would need to be replaced on the rebuild? I have never gone this deep into a motor before. I have the shop manual the engine is a 2006...
looks like I need two pistons and two heads top two holes have damage but the walls looked good atleast
I took the heads off last night found metal debris in the top two cylinders, cleaned it out and the flywheel will now rotate all the way around again. the walls of the cylinders looked good I ran out...
Friday I took the top two injectors off to give me a better look into the cylinders, I shined a light through the spark plug hole and noticed metal flakes in both of the top two cylinders. I looked...
The motor is a 2006 model 200 hp not 2008 model number is E200dhxsds
Can someone post a link to a website that I can find parts for the motor it is a 2008 200hp ETEC