2.0 liter.
Type: Posts; User: OnTRAK
2.0 liter.
Without having a jack plate, your motor may be mounted too high at 3.25" ptp. causing the 23 Tempest to blow out on the hole shot. You might want to try somewhere between 3.75" - 4.25."
That's cool! When I last talked to Hydro Tec, they weren't flashing the 2.8 L SHO motors. What hp did the Hydro Tec flash take your 150 SHO up to? What boat are you running it on? What is your...
I have a Yamaha 4 stroke 150 hp SHO motor. I experienced the same thing when I changed the fuel/water separator filter last month. I had filled the filter with fuel also. Finally, I just turned...
I have a 2014 VF150LA SHO motor on a Phoenix 618 and had similar questions several months ago. This is what I learned from the help of several BBC board members and my conversation with Simon...
I have a 618 with a 150 SHO and a Humminbird Helix 7 SI at the console. The SI transducer is mounted on the center of the holeshot plate and works perfect. It also has the in-hull 2D transducer...
Go to boats.net. Enter your engine info & zip code to check for availability.
Remove the quick connect fitting all together and run a new fuel line directly to the next fitting on the motor.
I have a similar stain on my starboard side rear storage locker of my 618. I thought someone fishing with the previous owner must have tracked tar or something onto the carpet. I tested several...
Thanks for the info & quick responses.
What is the rev limiter setting for the 150 hp SHO motor? I know the full throttle operating range is between 5000 - 6000 rpms.
Thanks
Even at today's prices, you can buy a lot of gas for $13,500.
Check out the Phoenix 818 Pro, 18'6" & rated for 150 -175. More upscale standard features than the 518 Pro.
Do check the plugs. I just performed the 100 hr. service on my 150 SHO. When I checked the plugs, I found the exterior porcelain insulator cracked on the #1 plug. As a result, I decided to replace...
Several years ago, my fishing buddy and I asked 2 guys fishing close to us how they were doing. One said, "We were doing great until we ran out of extension cord." He then proceeded to explain that...
My 2015 4Runner Trail Edition easily tows my Phoenix 618 Pro with a 150 Yamaha SHO & 3 size 31 batteries. Boat, motor, trailer all loaded probably weighs approximately 3500 lbs. You should be fine. ...
I have a 4Runner and always try to launch by the crack of 10:00am. I always get plenty of sleep at home, a healthy breakfast, and am well rested for the entire day of fishing.
]I’m 59 and just bought a 2022 Phoenix 21PHX - gym twice a week with a personal trainer and watching my diet.. Hoping to be still out there when I am Rick Clunn’s age :-)[/QUOTE]
I agree, staying...
72 years young. In 1984, I purchased a new 18' 179 Dyna Trak with a 2 liter 150 hp Mariner and have fished all the major reservoirs in GA in good & bad weather with no problems. Last May 2021, I...
I purchased a package of 4 2" round plastic end caps for steel fence posts to fit hole size from 1 3/4" to 1 7/8" on Amazon; and used a medium grit sanding drum on a Dremel tool to gradually reduce...
I purchased a package of 4 2" round plastic end caps for steel fence posts to fit hole size from 1 3/4" to 1 7/8" on Amazon and used a medium grit sanding drum on a Dremel tool to gradually reduce...
Try this: Lift Supports Depot, https://www.liftsupportsdepot.com Hope this helps.
I had a one owner 1984 2.0 Liter 150hp vertical reed motor on a 1984 18' Dyna Trak 179. I decided to check the reeds when I was rebuilding the carbs in December, 2017 (33 years) and, although none...
This is what I found out: Flo-Torq II Hub Kit # 8M0075402 is for 115-250 HP VMax SHO using 2 piece OEM thrust washers. Flo-Torq II Hub Kit # 835274Q1 is for 115-250 HP VMax SHO using 1 piece OEM...
Your motor probably came with the Yamaha SHO ventless 3 blade 22" pitch prop. When the Yamaha mechanic reset your jack plate, did you gain any speed or just rpm's? Did you lose any speed or water...