If there's less voltage drop it's because the conductors are larger, more copper. Not because it says sea clear. You can get American made marine wire off amazon....buy the good stuff. IMO, you need...
Type: Posts; User: JK9027
If there's less voltage drop it's because the conductors are larger, more copper. Not because it says sea clear. You can get American made marine wire off amazon....buy the good stuff. IMO, you need...
You have luck with the in warranty changes? Running wire to negative posts of each battery plus the jumper didn’t help me. All my interference was eminating from the motor casing itself so yours may...
Well, I use 15 lb power pro to fluro with the shin knot. 14/15 wraps 10 lb or lighter leader. If mine pulls loose it's at the lure, double pitzen knot. 10 lb braid is a little hinkier. The braid...
Forgive my ignorance in not being able to post the pic but mk chart for wire size plainly states that 8 awg is good for 25 ft at 112. Just sayin
Since nobody has said it....check the fuse in the head plus try it without battery charger wires connected. If that fuse is good it should show continuity from neg side of plug to tm prop...
I'm confused. Should be a 3 Amp fuse in the panel?
Mine both go on at power up and both off when I turn console unit off.
Are the stripes when you hit the tm pedal?
Thanks
I've run a drain wire from tm skeg to the negative of the starting battery due to emi issues on graphs, powered off the starting battery. Is this going to be detrimental to my aluminum hull over...
I like 3500 and 4000 sizes. That's just what I started with and they seem to cast farther with less wind knots. I don't think they're all the same sizes depending on manufacturer. My silver phulger...
IMO the bond wire goes straight to the negative side of the graph supply battery. Mine will anyway. I'm not sure why they call the return wire a ground. IMO a ground is attached to earth ground on...
I'd put a dedicated fuse in each line. I use the switchable breakers but even the perko switches I've seen have individual fuses hanging off the switch.
Thanks alot. My cables are separate on the tm and I'm using the beads supplied but these are from garmin and only big enough for one wire pass, I remember multiple passes with hb. I'm pulling...
Yeah, if I turn chirp off and gain down to 50% it's still a little blue tinge but I can see what the down vu shows....structure and fish identical on both. The fuse in the head is good. I think I'm...
No wide open it's gone. I'm thinking it's something to do with the speed adjustments.
It's a 24v maxxum 70 lb thrust and the gt54 transducer.
Boss makes several smaller different ball and pitching jig heads of various weights that are similar to a bitsy bug. They're also on tw. I'm a fan of the pip squeak in particular.
I'm getting blue biggly on the 2d of my newly installed 106sv with the 54 mounted on the tm. One of the many recommended fixes is a bond wire between tm and starting battery negatives. I've got a tin...
I've only had the cable driven motors and they've been very dependable. Plus, I can buy them cheap used when new boat owners upgrade. I don't intend to switch over.
I throw jerkbaits, soft and hard, plus smaller top waters like skimmers on spinning, braid to leader. I've never had any issues with stretch....you might get a wind knot or 2.
I can throw it a mile,...
I have the plastic trays on a tracker. I moved them around and put in different sizes by drilling new holes. I like my batteries strapped down. I was very careful to just pierce the metal plate...I'm...
Mine are ty wrapped thru the mounting holes to the livewell drain hose. I plan to move them to top of the gas tank, on a board with 2 sided tape. Maybe
Split bolt connectors
Fluto or copoly. Stretching or snapping has never been an issue with either.