Search:

Don't know if you are still looking. I've just posted a for sale of a 7" Triple Trout.
https://www.bbcboards.net/showthread.php?t=1247537

Used. A vintage 7" Triple Trout with extra tails. I don't know the name of the color. Not sure if they make this color anymore.
$50 tyd (lower 48)
Paypal

539285

:thumb up2: agreed. thanks.

Thanks.

And if you don't want to buy the Helmsmate type of device, you can make your own for much less. Incorporating one of the items below (or other types) to build one will let you use your...

You are welcome.

In response to some private messages, here are some details of the DIY mount for others who might be wondering too.

Note:


The pipes used are Schedule 40 Furniture Grade solid black PVCs (the...

Yeah, I decided to do it this way 'cause I wanted to avoid having to lift and deploy 2 things every time I move. My buddy hated doing that with his when he had those. So he bought the target lock...

No (but I've used it in forward mode very little so far). And I have not heard anything from folks who've been using the professional ones like target lock either.

I saw one (without mounting bracket) that costs about $220 (https://shut-up-and-fish.com/). A bracket for Humminbird 360 is $199. So for something similar it could cost close to that. But I just made...

Any experience/feedback on the rite hite turret?

Being not mechanically inclined and having limited skills (and limited tools), thought I'd share what I came up with and managed to make in case someone can use some ideas from it. Ugly, light and...

You're probably right on these two. But it'll be so cool if the Jags and the Niners are in it.

Thank you!

Hi Bill, Just came across this. Great info, great work. Do you, or anyone, know how much a fab shop charges to build the Ultrex mounting bracket using Aluminum (approximately)? I don't have tools nor...

How/what do you use to "inject" the epoxy into those small holes? And is it still holding up so far? Thanks.

Thank you Nelson. Do you cover everything (on the top side of the sending unit) with Permatex #2 or just the gasket?

And, do you also use the Permatex #2 at the fuel hose fittings (fuel and vent...

When installing/replacing a fuel sending unit, is it advisable to also use a sealant (silicone, seal-all, etc.)? Pros/cons? Thanks.

I have a Cabela's 3 bank charger for my 3 trolling batteries. The 1 bank stand alone for the cranking battery just died. As I looked around for a replacement I came across a 2-amp one. Besides the...

I'm diabetic type 2. To my surprise, exactly as Dr. Jason Fung stated in a video I watched, my blood sugar actually increased instead of decreasing. And that's not a bad thing while it was happening....

I kinda think so too. The onboard alternator charges the cranking battery while the engine is running anyway. So it seems that the cranking battery doesn't always need all that much charging after a...

Many are doing the fasting (multiple types/levels) today that has nothing to do with religious. Those who are overweight or with certain conditions (such as diabetes) can benefit from it. Look up Dr....

What are the pros and cons to use a 1-bank 2 Amp onboard charger to charge cranking battery? It's not the cost, it's the space I'm considering. Granted it will charge slower than the normal 10 or 5...

Do you pull the trailer by putting the safety pin in the hole to disable the brakes? If so, how has the pin held up so far? I'm going to have to do that temporarily till I have a chance to get the...

Thanks all. You all have convinced me that I need to get the originals cleaned and put back (I'll use the cheap ones as backups).

Wish I didn't have to spend months figuring this out. But at...

Thanks. If they leaned out the engine should lose noticeable power, correct?

Yes, I was surprised and skeptical at the very low cost. There are lots of them on eBay, somehow. But I took the chance...