Not sure what you want in a transducer but I just bought the same Helix unit and mine came with the standard transducer for that unit. It was a XNT 9 HW MDI 75 T.
Hummingbird says this transducer...
Type: Posts; User: Triton150
Not sure what you want in a transducer but I just bought the same Helix unit and mine came with the standard transducer for that unit. It was a XNT 9 HW MDI 75 T.
Hummingbird says this transducer...
Thanks Wayne, I'll change my selection to Built-IN HW: MDI+. I purchased the adapter cable for the Helix 8 when I bought the unit, so I'm good there.
Appreciate the response. Hopefully I'll be...
Just purchased an Ultrex with Mega DI and a Helix 8 Mega DI GPS G4N unit and I'm a little confused on which transducer to select from the Helix menu for the MDI. The options are:
1. HW + MEGA...
You're correct, external transducers don't come installed. The Mega DI transducer is built in, with the cable inside the shaft until it comes out of the control head. From there the cable is routed...
I'm beyond belief that my brand new Ultrex with Mega DI has the transducer cable zip tied to the steering (foot pedal) cable with zip ties that look like the below pictures. I've been around Cable...
Thanks...
I'm not understanding the difference between Ultrex Cruise Control and Legacy Autopilot. I understand Legacy Autopilot takes a compass bearing and navigates to it. Does Cruise Control basically do...
Thanks NoCAL. I plan on using the new power cable.
That's true now, but back in the day I don't think NEMA 2000 Ports existed on the units and I believe you had to use these two cables to power the NEMA network. It's a very old cable, probably left...
Thanks. Now that I relook at the blue cable, the two Nema and Rs-232 wires were just taped together with electrical tape and not physically connected to anything. So I think I'm in the clear. ...
On my Console is a HDS CARBON UNIT. On my bow I'm replacing a HDS GEN 3 with HDS LIVE.
The power cord on the bow for the GEN3 is a 3-wire Lowrance Blue connector. It's a power cable plus a...
My real question is "should I replace my 2007 Gold Buddy Oil Bath hubs/bearings based on age?"
2007 Marine Master single axle trailer with Gold Buddy Hubs and brakes. No problems that I'm...
Thanks. It currently doesn't run in any mode. Continuous or MOM.
Need some assistance. 24v Fortrex (about 6 or 7 years old) stopped working on the water this morning. Has been bullet proof so far!
Here's what I know. The trolling motor is on master switch in...
Sell it to a NASCAR driver....
I will certainly do some homework on this. Thanks.
I have a Triton 07 TR-186 with 150 Opti. I have 2 Lowrance Carbon 9's, and one HDS Gen3 7" graph and 2 Power poles on a cutoff switch (and not used very often and the switch is off unless I'm...
I'm only using one of my ethernet ports on my Carbon 9 at the console. The one I'm using is connected to a Gen 3 9" unit at the bow, which in turn is connected to a Gen 3 7" at the bow.
What are...
Thanks....I vote for the ethernet cable going bad. Mine are many years old.
No doubt this is op error of some sort but I have a Carbon 9 at the console and a Gen 3 HDS 9 and 7 at the bow, all linked. I'm running C-Map on the Carbon and the GEN3 9. I have a Navionics chip...
Anyone mount two bow graphs on a TR-186? Would be interested to find out what mount you used and maybe a picture!
thanks,
different sources.... I believe that will solve it. will find out this weekend. Thanks!!
Why would I have a depth overlay reading on sonar but not on my map (C-Map or Navonics)? On the map I just have 3 dashes. This just started today. On Tuesday I had Depth.
Nevermind.....I found the PP menu on a skinny vertical bar on the left side of my screen. They work...
My dual Sportsman power poles are paired with a bow mounted foot switch.
I just installed a Carbon 9 unit at the bow. I tried to pair the poles to the Carbon and they appear to be paired but are...