Thanks again!!!
Type: Posts; User: Xed ya
Thanks again!!!
But will it read bottom I know it won't have chirp but would it work in a pinch? I don't have time to install the new transducer before my next tx. Thanks for your help!
Is a XP 920 T transducer compatible with the Helix 12 MSI DI G4? Thanks
Okay with all that said If I don't use the puck at all will the spotlock still work? Ultrex I-pilot non link
Yes I tow with it on but mainly when its wet to keep out the road grime and got a roll of plastic rap (like is used on supplies on pallets) and wrap it all the way around the gunnel before putting...
I put mine on a small piece of aluminum so I could move them around to see where they would better suit me before I dill holes. Just remember to store it before you take off or trailer.
Work as you said! Reversed the wires. It's back together and good to go THANKS!!!!!!!!!!!
Couldn't get the button to come out, I don't want break it
Boat manu. wired the 12v acc reverse polarity so removal of the shift assembly is necessary to reach wires. Plugged in phone charger and it blew up in my hand
SN 2BB0920966 2015 250 pro xs: Will I have to remove the center button on the shifter handle on this model (as I read in a previous post)? Thanks!!:salute:
What should be the compression on a 1995 25hp merc S/N 0G264269 what is acceptable? THANKS
I've been holding back on posting my numbers because they were that good not wanting to get into a fire up debate. My wife and other fishing partners were just as impressed as I was. This boat is one...
What came out of the dealer's meeting? I've been sitting back quietly while the slow out of the hole issue has been waged over and I'm ready for the end all solution! Mine is 2015 V20 DC 250 Pro XS...
I use stainless steel screws with lock nuts
Mine went out on the trailor of my V20 I bought in April. Mine were blue also and I hope the new ones will be white. EZ Loader is sending mine no charge and should be here Mon. Kazz told me that the...
Ok but it'll be a week or so
What boat model? On my V20 acc4 is for the livewell internal recirc. You may have blown a fuse
PM sent
Got it from Malone"s Marine in Ironton, OH. You can't ask for a better guy to deal with than Chris. He was at the end of the phone before the sale and after (I had many questions as I live 800 miles...
PM sent to ya grey goose 01
Ok. Just found it odd that out of all of the other injectors its the only one showing grounded
Thanks guys! Any thoughts of the J1 side of the harness? What wire/pin number on the J1 plug matches to the #2 pin on the J2 plug so I can trace out the J1 side of the harness for a possible ground.
Bought 94 javelin with 2004 E225FH6RM SN:05036495: while fishing tx stared up after first spot and motor would only get up to 1200 rpm (pretection mode I guess) limped back to ramp. Took to dealer...
In 2000 the grass was in good shape, but in 2003 it is was all but gone, now it looks as though the lilly pads are starting to dwindle. The grass carps are now eatting the pads root system. Also...
Use a paint marker instead of a sharpie.