Search:

https://boatlogix.net/product/wire-cover/

2.5° is roughly 1" per two feet which is pretty close to the length of a trolling motor mount.
I recommend taking a two foot level and laying it next to your trolling motor mount, if you have a...

I have three carbon 12s, at1 and point 1. everything is networked, updated everything to the latest and been out a couple times this year. Not a single issue so far, I really can't tell a difference...

So you've got 5 batteries. I would imagine the two on the port side and center are for your trolling motor. Does it go

*Breaker to + side of first battery
*Jumper from - side of first battery to...

Fish obsessed

544844
In this general area. Should have markers

Did you check the ranger boat fuse panel? They may have a fuse for front graphs, and a separate for the console. You should consider a dedicated 8 or 6ga run from your battery to that blue seas fuse...

7 pin transducer to 9 pin unit if live or live pro. XDCRADAPTER 7-PINXDCRTO9-PINUNIT (russellmarineproducts.com) thats for a 2d transducer like a pd-wbl

so, I know there are some downsides to the shifter method "break in mode" and it may not be considered the correct method. I'm curious though. New compressor in with fresh rings that need to be...

price drop

You could run one elite 9 at the console for your 3 in 1 transducer for side and down, and the other elite 9 for 2d "shoot thru" and gps, run the ethernet from this to the bow unit. What kind of...

The new slx 70. $150. Has some blue accents that might go well with the rod. Under 7oz. The jdm slxDCxt is a little over your price range but is pretty nice.

An infrared temp gun is probably the best thing I've purchased for figuring out which thermostat is causing the issue, I think the smartcraft gives an average of both or something along those lines.

https://www.bassboatseats.com/collections/bass-boat-parts-accessories/products/bass-boat-carpet-trim. This?

These are aftermarket seats but I installed them exactly how ranger did. Originally this was a bench. This is a 2000 520vx, should be similar.
542397
542399

Depends on what you're doing with it. The chronarch has a 150 spool, is lighter, smaller in hand. Will be better for smaller baits/lighter line.The M is a 200 size and is bigger. heavier line, long...

don't sleep on the 3000mgh- 4000 size body/gears with a "M" 2500/c3000 size rotor and spool. its almost the same speed as a 2500shg. it's about 1/2 an ounce heavier than the 2500sgh but the weight is...

I'm not 100% clear on your terminology, are you saying the spool is rubbing on the magnets in the side plate? Have you checked the felt behind the bearing on the side plate? Also you tried swapping...

The biggest pia of the whole project is taking it somewhere to get the oil pump prime if you need to disconnect an oil line. Pretty straight forward with Don's notes, tdr reeds/gaskets and a service...

Price dropped

Reel is in great shape, little bit or rash on the rotor and a small spot on the side cover. box and paperwork. $115TYD
540864
540865

https://www.bbcboards.net/showthread.php?t=22574If you are unable to locate what you are looking for through the website:

Please contact me directly by email! Parts department can be reached at:...

5.3:1 ratio?

Blue seas 539599

I believe this will help you https://www.bbcboards.net/showthread.php?t=21874