The TXP is about a 1 pitch stiffer prop than the 27M, from what I can tell.
Type: Posts; User: Heath90
The TXP is about a 1 pitch stiffer prop than the 27M, from what I can tell.
Trying to prop a 2002 210 Pro-V with a 2002 Yamaha 250 OX66. The guy I bought it from was running a Yamaha 27M and it did o...k... but not great.
I know that alot of guys run a Yamaha T1 27P on...
16 footers.
I have a 2002 and called because I had a bad hose. They told me the hydraulic hoses are 16'.
Two things that would worry me. First, the numbers seem to be really low. Yes, the bigger issue is the variance between the compression numbers, but I have personally had three OX66 motors (all were...
Thanks DrewFlu33 and joebone1. I talked to Ranger today and he said that the way they set the boat up is different than how I am measuring. He said that at the factory they level it and set the...
Need some advice. Have a 2002 205DVS with 2012 225 Vmax SHO and an 8" Slidemaster. Running 2 5/8" below pad and have tried the following props: 24p Tempest - 64 mph GPS @ 5750 rpms; 23p T1 - 64mph...
I have a friend who owns a 5 Star Yamaha dealership in NW Florida. I actually looked at one of the 300 HPDI's a couple years ago and asked him about it. He said they are good for a powerhead about...
Well, fair enough then :-)
Thanks, bro. I like it, but if I had known when I started that it would be so much work, I think mine would have carpet in it today too :-)
Thanks. I used a material from SRS Coatings out of Texas called Envirogrip. It is a two part rubber membrane that you allow to set almost completely up then you put non-skid into it. Once it cures 24...
Thanks for the reply arjone01. Yes, I am familiar with Nidacore and have used it in boats i have repaired in the past. This almost looks more like Coosa board than it does the honeycomb of Nidacore,...
Moose288, I redid the carpet myself...I did not REPLACE the floors. I pulled the carpet and put rubber nonskid in. arjone01, I don't know on the stringers, which is why I started the thread. However,...
Hi fellows, I have a 1999 201d that I had a couple of questions on.
1) I know that the transom is wood on it, based on when I changed out the splash well fittings for new ones. I also know that the...