Thanks for the reply Don. I left out some pertinent information. My prop, which is a 24P Fury 3 has been to Mark's shop a couple of times. The second time he sent it back and did nothing to it and...
Type: Posts; User: gsb0824
Thanks for the reply Don. I left out some pertinent information. My prop, which is a 24P Fury 3 has been to Mark's shop a couple of times. The second time he sent it back and did nothing to it and...
I repowered my Ranger Z520L in 2020 with a 4S, Mercury 250 ProXS, serial number 2B739267. From day one until now, it has never hit over 5900 rpms. It has had a 23P Fury and a 24P Fury. The motor...
I am getting a 126/LS install next week. Should I skip the latest update?
Getting the 126/LS installed next week. Should I not do the update?
Can I put the dual trim levers found in the new 520R on my 520L? Where can you buy them?
The 520R as it is spec’d won’t fit in my garage.
Same here. I am actually looking at going the Phoenix route to get a 19 footer.
I have a 2018 Ranger Z520L that has the original electronics on it, HB Solix 15 at the console and Solix 12 at the box, both are Gen1. I would like to add Panoptix to the HB 12 at the bow. What...
Congratulations! When you get it, can you let us know how long it is on the trailer with motor down and tongue open. I am ready to purchase one, but if it is longer than a z520L it won’t fit in my...
Same with me. I repowered my 2018 520L in 2020 but wanted new electronics and wanted to see if the newer 520L's fit on the trailer better. Then the 520R was unveiled so was going to opt for it. ...
That was my plan until yesterday. I just found out the 520R is two feet longer on the trailer with the tongue open than the 520L is. It won't fit in my garage. I will either hope and wait until a...
I don't think the specs are correct for the 520R. Should the length on trailer with tongue open be the same as on a 520L? I could be wrong, but I thought I saw where the 520R is three feet longer...
Summer is approaching and I want to leave my 520L on a lift in my covered dock for the summer. Is there a dust cover available that is best for this. I have the standard cover but it is a beast and...
I repowered a Ranger 520L from a 2018 2S to a 2020 4S. Took me forever to get the dealer to set the throttle correctly. The 4S came with a Fury 3, 23P. I switched to a 24P for more top end, less...
I have a Fury 3 prop that I sent off to Mark for some tweaking. I am trying to put it back on the boat and can't get the hub to go in all the way. Is there a trick to this. It took me forever to...
Well, I finally got it out. Thanks to everyone on here and on the FB Mercury Owner's Group. Went and got a 1-1/16th socket and a long extension and used a sledge hammer to beat it out. Hope I...
I am sending my prop to Mark for a blueprinting and can't get the flo-torque prop hub out of it. Is there a trick to this? The hub is on a Mercury ProXS 250 four stroke. Any advice would be...
I have a 2020 ProXS 250, serial number 2B739267. I also have a MercMonitor level 0 I think. I would like to get and install Vessel View Mobile. First, where do I get it. Second, can I simply...
Hearing the 2021 "L" models will have air ride seats. Don't know how true this is, but came from a reliable source.
We almost have the same boat.
Took the palm of my hand and smacked it at the top of the unit towards the right. And it was a hard smack. Instantly fixed.
I finally fixed this, after a whole year. Last time out I got so frustrated with it I simply smacked it real hard with the palm of my hand. It instantly fixed itself. Maybe something loose in the...
Mine did the exact same thing. Don't know if my problem is your problem though. Mine was hotfoot/throttle related. It took three months and three trips to the dealer to finally resolve it. I...
Does anyone know why these lines appear on most every screen? And they move across the screen. Sometimes start at the bottom like in the picture, then sometimes are in the middle of the screen. ...
Ok, I give up. I have tried Vinegar Windex, pure vinegar, water, soap and water, etc. and still can't seem to be able to get all the fingerprints and smudges off my Solix units. Is there a secret...