"Ethernet 360 support has been removed from this software."
Does this mean the original 360 will no longer work if I perform this software update?
Type: Posts; User: dmackaravitz
"Ethernet 360 support has been removed from this software."
Does this mean the original 360 will no longer work if I perform this software update?
I sent in a few 110's that were leaking. They sent me an "invoice" about a month after i sent them in with the shipping info for new ones. Received them in 3-4 days.
It wouldn't cause any issues. But is nice to have to ensure nothing was left on.
I also don't believe it to be necessary to have, but if you're going to be re arranging some wiring its a pretty...
I have found that if lakemaster has the lake in their HD contours it is phenomenal. If you run humminbird units they will give you added features (depth highlights, follow the contour, fishsmart,...
I went with 100ah and the 24v troller for a few reasons:
1. Can use a troller to jump the motor if needed
2. Can go multiple days without needing a charge
3. In the event the batteries begin to...
I run 24v Ultrex and went with dual 100ah Ionic. Reasons to go that large:
1. Can use a troller as a cranking battery in a pinch
2. Can go multiple days on a trip without having to hunt down a...
Rochester Bassmasters Preseason Tournament on 5/14 took 31.1lbs to win.
Partner and I had 28.24 good enough for 2nd place.
Cayuga is a special place in the spring
Thanks, It started out as my worst day of fishing, 15-20mph winds, 30* temps in the morning. Without a single bite for 6 hours, I packed all my stuff and headed towards the ramp, decided to make one...
Spent 7 Hours there last Thursday, nothing for 6 hours. Last hour found a spot and ended up getting 10 in an hour. Best 5 between 25-26lbs. With this 7-11 mixed in there.488921
However it took 6...
I ended up cutting a hole under the TM pedal on my 2002 Sabre.
Allows full access to the underside for proper mounting, as well as makes it easier to run wires.
I would highly recommend...
Yes. I have a G4N DI+ that will display the original 360.
I guess it depends how easy you can access a fuse box in the bow, for me its a 30 minute job off the water. So if a fuse is blown its not really something I can quick replace and be on my way.
You always fuse as close to the power source as possible, in your case the power source is coming from the fuse block. Once that is fused you don't need another fuse along the circuit.
From the...
I would run 10awg from fuse panel to front for the Helix 10. With a terminal block near the units. where you would connect the factory wire to.
When you add a second H10 do the same as your first...
Everything would work as you have it laid out, a couple of things I saw..
Is the ultrex going to be I-Pilot Link?
You should consider an in hull 2d transducer or a high speed 2d transducer with...
Forrest made a joke about becoming a millionaire on AAPL stock.... if you invested $1000 in AAPL on the day Forrest Gump was released and reinvested it's dividends it would now be worth...
Good to know, I was not aware the Mega 360 could be shared to a G2.
If you plan on Mega 360 or Mega Live it needs to be a G3N w/ Mega+
If it is the old 360 a G2N will work and does not need to be SI or DI.
I currently run a G2N 10 for 360 and G4N 10 for Live.
Just connect each bank to each battery. Will be fine. Did it this way for several years.
No need to remove any jumpers.
I bought the greenworks 10 Amp dethatcher. Worked good for my lawn, only 4000sqft. It doesn't have a bag, but the piles are pretty easily picked up just running a mower with a bag on it.
Key was...
I found it hard to believe you couldn't convert the transducers. I was digging through HB website and couldn't find anything. Nice to know MK makes something for it.
My guess would be your console Solix has the shoot-thru transducer and the SI transducer. The Helix at the console was set up for mapping only.
One of the bow graphs is connected to the TM mounted...
Cut the hole under the pedal. Will make everything you're trying to do 100x easier. Even with the hole its still tough to run some of the wires.
I cut a hole in my 02' Sabre, no issues.
If you...
In the US where is the best place to be in March for fishing?
We'll still be plenty cold up here in the NE but I want to look into a trip somewhere south and catch the spawn, maybe somewhere with...
Does anyone have a good source for a DIY tutorial for cleaning a reel?