What elevation are you running at? Seems about right to me. I am at 2500 foot elevation and that is about what I run with a 24 pitch prop in a 2013 Z20 with a 250 pro xs. Most of the high speed...
Type: Posts; User: joevandal95
What elevation are you running at? Seems about right to me. I am at 2500 foot elevation and that is about what I run with a 24 pitch prop in a 2013 Z20 with a 250 pro xs. Most of the high speed...
that is correct.
A little on the spendy side, but I though it turned out great. Nice having the tool slots also.
469671469672469673
Thanks for the reply. I will let you know what I do. I have my engine height set at 3.75 right now. I am going to run at that to see what my RPMs are on the Tempest before I spend money on a prop...
I hardly have anything in the front. Just hard baits. So If I am running a 25 pitch Tempest I will want to go up a pitch for a Bravo 1 XS?
On a Bravo 1 XS do you need to go up a pitch from the Tempest?
Thanks appreciate the response. I am not looking for crazy speed but would like to get around 70 MPH.
Tom
I just bought a new to me 2013 Nitro Z8. I currently have a 25 pitch Tempest Plus on it. The best I have done is 64.5 MPH at 5850 RPM. I am getting a lot of slip and shooting a pretty good rooster...
Yeah, that is what I am figuring I am probably going to have to do. Not sure why they did not put it on the left side. They should of switched the horn and ignition location. Love everything about...
Hi,
I recently bought a 2013 Nitro Z8 and love everything about it except the location of the ignition. Has anyone relocated this or put in a push button start? I would looking at a...
I replaced the starter. All is well again. Just wanted to post this for others to know my remedy. Did not have time to take started to have rebuilt as I had a tournament that weekend.
12.50 volts at battery when cranking
12.50 volts at solenoid when cranking
12.50 volts at starter when cranking.
I removed the starter and hooked it up directly to the battery using jumper...
Ok thanks.
I have a 2007 Etec 150 and it is having a hard time turning over. I bought a new battery thinking that was the problem but problem still exist. I exchanged it for one with more cranking amps but...
Geez you all suck. $3.79 here in Idaho. Diesel is still over $4.
I had a tube submerge on me and almost ripped the pole out of the back deck. If i would of gotten off the throttle any later I think I would of been in trouble. Since then I run from the transom...
What brand of prop are you running right now? Tempest plus seems to be the general consensus as running the best on these fish/ski. The key is getting the bow to lift and the tempest plus seems to...
He has helped me with a few issue. Was able to diagnose an issue for me by me posting pictures on this site. Had parts in a couple days.
mark does good work. make sure you have put in extra cup.
I have found that the raker props did not have enough lift for my boat. I would highly recommend looking for a Tempest Plus. That prop solved all the problem that you are talking about for me. I...
Pitch is not going to fix a blow issue. What RPM and top speed are you running? Also do you have a jackplate? What is your Prop to pad measurement? Do not try to setup a fish and ski like a...
I have an 01 Dodge Cummins with an auto and 3.55 rear end. Best I have ever seen was a little over 19 MPG. I could probably get around 20 if I have driving all highway, no hills or wind, and...
Pretty much what I was thinking. You have two issues. One she is in school, that usually disqualifies one from receiving unemployment. The second was that she was fired, many state do not pay...
I have given up on trying to buy fishing tackle local. Every time I go in to buy something it seems they are out of stock. I went to 3 stores yesterday. One store was dang near out of everything...
BWW has been good to our club. For the past two years and they are on board again this year, they sponsor the food for our kids tournament we put on each year. We also have a raffle after the...