I have a 21 RT188p with Mercury 115 Proxs CT. Trolling motor is a Minn Kota Ultrex 115. I have attached pictures of the welds on the bottom of mine. Although this was not the complete performance...
Type: Posts; User: Jbotunn
I have a 21 RT188p with Mercury 115 Proxs CT. Trolling motor is a Minn Kota Ultrex 115. I have attached pictures of the welds on the bottom of mine. Although this was not the complete performance...
Emiline75
I do not have a Smart craft Gauge. That could be the issue.
Don
Attached is a picture of my Backbone. From left to right the tee's are Helm Ti2, Mercury Gateway, Power node and Bow Ti2. The second Picture is the Helm Ti2 showing communications the with...
Don
I was able to get the Cable and Junction box installed over the weekend. However I still do not have data on my Lowrance. The NEMA light on the gateway has a slow blink, the can light is on...
I have a 188p with the same issue. I also will have moisture show up in my gauges. I think it is a issue with the cooler. I have opened all the lids and let it dry out, it will stay dry until I put ...
What trolling motors are y'all running? Jackplate? Will it get up on the Pad?
Motor is on a Ranger RT188p. I do not have a Junction Box or 10 Pin Connector under the dash.
I will look this weekend.
I apologize about the bay reference, I did not know. I installed the NEMA netwerk my self. My Ti2 at the Console and the Bow Communicate. I added the Gateway in hopes i could see engine information....
I bought the Gateway off ebay. I did not install a smart craft network. What is required to install smart craft network.
I have a 2021 115 ProXS CT. SER# 2B802444. I used a Mercury Part# 8M0165589 Gateway with a Lowrance MEMA starter kit to connect my Engine the Elite Ti2. First attempt the NEMA light in the Gateway...
Mine came with paddle, fire extinguisher and running lights. After you pick yours, post what performance you obtain.
I would like to change the trolling motor to a 24 volt. The eight pounds extra dead on the nose is a big difference, any time you can loose weight in a boat performance improves. I would be willing...
No porpoising, I feel like if i could get it to pick the bow up it would be in the 46 to 48 range.
No, I have not tried any other prop. Was thinking of going in the four blade direction, try and get a little lift.
Just got my RT188P, 6” Jack Plate, 115 ProXS with 24 Temptest Plus. Prop shaft 6” below pad. 43 MPH at 5800 RPMS.
Ultrex TM 36 volt. Hoping for more bow lift and faster speeds. What other setups,...