I had an inguinal hernia repaired about 2 weeks ago and it was laparoscopic with the mesh. Recovery hasn't been too bad, I could get up and move around the next day and after 2 weeks I feel pretty...
Type: Posts; User: Mobass46
I had an inguinal hernia repaired about 2 weeks ago and it was laparoscopic with the mesh. Recovery hasn't been too bad, I could get up and move around the next day and after 2 weeks I feel pretty...
Just got back from Canada and drove mine home 1000 miles with the plate stuck all the way up. The seal on the nose of the cylinder is rolled up and has clearly failed. Thankfully it quit on the...
It is dark gray
440868
Pull the trigger you won't regret it. I took a test ride at the classic last year in Birmingham and got mine a couple of months later. I like the storage layout and it's quick to maneuver...
I have a 20 eyra with that same setup, bob's, poles, 4 agm batteries and it came from the factory with a 24p fury 3. I've been very happy with that prop
I have tried running the plate higher and it works but it takes a little more finesse as it blows out more. I will raise the plate almost all the way up if I'm trying to get on plane in shallow...
I have a 20 eyra with poles 250 pro xs 4s and a bobs running a 24p fury 3 with no holes plugged. I start off with the bobs almost to 3 mat the throttle and as soon as the bow comes up I start the...
I have a 2020 and it came with a 24 fury 3. I have poles and a bob's plate, I'm happy with hole shot and performance with 2 people and full load of tackle.
They are quite an improvement
I am happy with the dual 93 sv units I have on the bow. If I was going with a single unit I would probably go with a 106 sv. I was trying to keep things as compact as possible on the bow plus the...
I talked to Garmin customer support and they gave me a few tips, I was on the water last night and here is an updated image. I'm running a uhd 93 sv software v 13.2 and a v 2.41 on the livescope. ...
I hear that, I was trying to update my trolling motor software and the Garmin app got me! it updated everything on the boat. So far everything else is working great, I've got a 106sv on the console...
it is an echomap uhd 93sv
Thanks for the tips, I adjusted on the gain and the noise reject and was able to get rid of most of it. Seems like no matter the brand every time I do a software update there are issues.
422182
422184
Can't figure out what this is on my livescope, has anyone ever seen this before. It shows up no matter the depth or location. Just updated the software, Ive adjusted setting and...
417041
Good news, took it to Marty's Marine and they found the origin of the bolt, it was from the exhaust manifold. It has been reinstalled and I'm ready to go.
They didn't refuse to look at it, just couldn't get to it as quickly as I would have liked. They were all extremely busy due to the upcoming holiday and had a line in front of me of customers that...
Thanks Don, I've got an appointment to get it looked at Tuesday morning. Everyone was really backed up here due to the holiday and since I didn't buy it from them I understand not being able to get...
414846
Here is the bolt, took a few bolts out of the cowling and was able to remove it but didn't get the cowling off. I can get it looked at next week, was hoping to get back on the water sooner.
2020 mercury 250 pro xs s/n 2b733600 27 hrs
There is a loose bolt laying under the lower cowling of my motor. I'm looking for a video or directions on how to remove the lower cowling so I can put...
I had to adjust one on my lynx. I put a light in the box and watched the strut as I closed the box. By doing this it was easy to see the direction it needed to go, it was an easy fix.
I've got 2 helix 10's on the bow of mine, I made a mount out of aluminum channel and angle that fits into the recess on the bow.
380703
380704
I find my lynx easy to drive, I've got 152 hours on in and haven't hooked it yet. I'm on Lake of the Ozarks and we have quite a few boat wakes. If you are interested in a caracal or lynx I'd try...
I'm in