That is FAH.
I understand it looks like I am not focused on the first rule of trouble shooting.
Isolate and eliminate. Unfortunately, as I progressed through the testing, I encountered a few...
Type: Posts; User: gofastsandman
That is FAH.
I understand it looks like I am not focused on the first rule of trouble shooting.
Isolate and eliminate. Unfortunately, as I progressed through the testing, I encountered a few...
The 60`s hulls had mostly end grain balsa core and were 200 lbs lighter.
1400 lbs for a 20 ft near shore boat. We do take these a bit farther out.
My boat should run 43-45 all day. So a 12 mph...
I really wish I could agree with you!
I love looking at windmills, not chasing them.
Ryan is running a J150 nxecd
I did not change the running surface.
An 85 hp Johnson from the 60s...
Ok lets use my friend Ryan on CSC. Same hull same engine same prop. 17 p to my 16p . He sees 45 mph wot.
Same year hull and engine. Exactly.
gained 350 rpm changing the plug wires, but not a...
Calling the good doctor later today.
No, just turning the starter.
Did a static timing test tonight. Light on # 1 wire. Others off and tied away. 30 btdc. 19 is full so maybe I am making progress.
Binnie out of gear and full throttle.
Test repeated three...
Sorry about your dad. We heard about Frank passing on CSC.
Stop tool 30 degrees atdc
29 degrees btdc so only 1/2 degree difference
Have some time now shop is closed. All 6 fired at 7-8 atdc. No cross talk. Doing piston stop next.
Ask your dad about Denny Bushnell. He was a performance engineer at Pratt from `67 till he retired in early 2000`s?
Small world indeed. When Carl finally gave up the old twin Homelite 55 bear cat...
Took a step back today and worked around the house. Mostly thought about where I am and questions moving forward.
I know this is BASS boat central and you guys love big power. I`m sure many of you...
New 169 gal ss tank. Really nice engines and I`m only into them for 1500 clams after flipping the hull to a friend that night
for short money.
Twin 250`s would not be a problem. Only 4 of 10 made...
I`ll need a bigger tanker to tow behind her.
Mark Hauptner of Ocean Master was co-driver on her first race. Trip 110 mercs from Haulover { Ft Lauderdale } to Key West.
Set a new OB record of...
Thanks.
Will pm tonight for code. I have 2 more of these
going on a race boat project. 1967 SeaCraft closed
deck race hull My Racing Machine which was Carl's boat.
I saw your product on ebay.
I'll pick one up tonight.
any guidance is appreciated with the present unit.
Plan to work on her after work at 6
Back to the light I go.
Ignition analyzer is missing the button to switch from 4 to 6 cyl. The white stem under where there was a button is stuck.
How do I tell if it is set to 4 or 6 cyl?
Was able to borrow an ignition analyzer and piston
stop tool from a local dealer where I buy parts.
Have a test dummy but no wheel.
Will do. How do I check final timing advance?
Denny is in Mich. on the trawler with his wife. They will be maybe 2 more months coming down the Mississippi and around the gulf and straights of Fl. back home.
Another friend has a Cyclone on the...
New factory HT wires and all six jumping 7/16
W pretty blue spark.
Think my timing light is with my dwell meter haha.
Agreed. What would you check next?
The air box makes anything but a miserable seal.
I can`t help but think it is something silly.