Search:

Yes, I have the new remote cable on order it should be here thursday.
The remote cable on the motor side was a real bear to get apart. The pin was broken due to corrosion.
Thanks for the help...

Well i tried again to get the 10P connector on the motor apart. I found that there is a sliding collar that after removing it then i could pry the 2 connectors apart. There is even a O ring to help...

I managed to check and verify that the main relay is O.K.
I also verified that the Kill switch on the console was working and getting to the motor. I can get to the back of the remote control cable...

Not yet. I keep the boat at a Shanty on the bay in the water so yesterday i towed it to the boat ramp with my skiff. I will look at it some more today. The first thing i am going to try is is to...

Yes, i have checked the cables. I also have replaced on of the batteries and gave it a full charge. I then removed the battery selector and now only using the new battery.

Well i agree the test lite works but so will the DVM. Nothing at all happens when i turn the key on or try to start. I can't even rise or lower the motor from the controls. This tells me , if i...

I have a digital voltmeter and i do have access to the back but it is a bit of a stretch and i tried to take the switch panel out to get to it but unable to without prying.

I am not sure if power is at the switch. I don't know where to check it .

Yes the fuses are all good and i checked the voltage from the battery is at the motor.

My Yamaha 2004 F115 with 640Hrs. has decided to to take a break. It ran good the last time i used it and now nothing. It shows no indications at all on the console when the key is turned to on. There...