Reduced price and added an old prop into the deal.
Type: Posts; User: ANG
Reduced price and added an old prop into the deal.
25 pitch Turbo 3 blade prop with a 14.5" diameter. It's not bad but has seen better days. It would work good as a spare or just needing go get on the water. It still has plenty of cup and no big...
Hey Mark, yeah I have one that my work for you. It's a 30 with added tip cup so runs a little stiff. Give me a call 904-607-2274 I don't have a cav ring, if you don't I'm sure Mike has one at the...
It did help a lot, I may have an issue with it not spooling since mine has more ventilation than an optimax but we will see.
What's the deal with the holeshot? Does it bog down or spool up or blow out like a promax? I have 2 promax props I run now and a full performer 4 on the way. Just curious of what to expect and my...
what performance difference would be expected between a full performer, a BC performer 4, and a SC performer 4?
Not too much, been messing around with the boat a little. I've got a new sound system to put in and a 30 performer 4 on the way.
Loved my 96, fast and a good fishing platform. I took the decals off mine and got compliments everywhere and people wanting to know what kind of boat that was.
My wife has one liver shorthaired pointer puppy left. He is a male and is solid liver with a white chest and feet. These are great hunting dogs and are loving pets. He is AKC registered, tail docked,...
I have a ProEt that has a crack in it, what are some of the best prop shops in the states that may be able to fix it?
Sharp boat, I love the white, very clean look. I can't do white here because the water will stain it and make it brown. I know the motor is iffy but you can't go wrong with a 21' xdc, great boat.
Hey Mark, how much set back are you running? I cant recall, do you have power poles? I may have a few more questions once your prop comes in and you get her dialed in. I may take mine out in the...
Yeah, I am running a 29 Promax with 8 pvs holes. It does good runs in the mid 90s. Not much faster than the 1996 Procraft SuperPro. I was running 30p Bravo xs props on the SuperPro with the 300s....
Found a 1995 ProCraft super pro 200 same as the Astro F20 for sale on craigslist, blairsville, Ga. $11,500 with an xri 200 merc. It looks good. If you have the coin it's a great boat, super fast and...
Yeah, I purchased two one for $5500 and the other for $6000 with 200s on them just a few years ago. I loved my black and red one with no decals with my 300xs and 300 promax on it. Got looks and...
It does, he got the 250R
Hey Mark, I went by the shop on Monday. It was looking good with that beast hanging on the back. I'm sure Mike probably has a prop around there you can use until your max5 comes in.
I have the 94sv up front as well. I like it a lot.
Ok if it were mine I would hang the 250xs on it. The 200 optimax would weigh the same just have less power. My 96 ProCraft SuperPro was rated for a 200 but I had several 3.0s on it: 250xs, 300xs, and...
Ok in the first post I think you have it as a 1999. If it is a 1995 then the max should be 200hp on the plate but the boat is lighter weighing in at less that 1800 lb.
I know down here in FL if the boat is 20' or more legally you can put any hp you want. The plate is just the manufacturer recommended max hp. If under 20' then the max hp is as high as you could go...
Yeah that's with most before the 3.0s came out.
Boat weighs 2250 lb and should have a max HP of 225
I hope everyone is doing good and keeping good spirits
Gcross for sure. I was a contender a couple years ago with my 1996 SP. I hung 5 different motors on mine: 200efi, 250xs, 300xs, 300pm, and settled with a 225pm.