Search:

TM165HW frequencies 150-250khz so 165 is the better choice? The cone is pretty much 30 to 34 degrees no matter where. What does 250 do?
Any idea why the other pictures show the blue busy noise?...

What can I run the TM165HW and B75H at to avoid interference? Same time that is.
What exactly is up with pictures 1 and 4, am I supposed to go to negative sensitivity to get rid of the blue?
What...

Wanted to share some pictures of the B75H. I don't know why but they seem off to me, I don't have any experience with it though.
Fish marks are smaller than I thought and some I broken up. Are the...

Yes sir you certainly did, I usually post on multiple forums in case I don't get any answers. Thanks

I ordered a temporary solution until I get around to buying a better unit. For $100 I got the Navico HDI 50/200/455/800 000-12569-001 it has 12 degrees at 200khz so it should temporarily show...

I have to tell you the TM165HW was not so good to me on Socal fishingw. It definitly doesn't work at 300 feet to show much. Either that or there are no fish where I went. A huge school of fish went...

I watched some videos that mentioned the bottom from my picture could be like that from choppy water and it is actually straight.
Is that true? So weird that the blue lines are from the choppy...

It was choppy for sure, I am waiting for that glass ocean condition here in SoCal. It might never come, was told at the end of summer.
Have another question the color of the fish arches do they say...

Off the coast shallow water, a bit confused on what the TM165HW is telling me here. The little red is probably a fish but all the blue? Is that my line?
458438
458439

I got the MMC-BL adapter and will soon get to see what this transducer can do.
I got a 7 inch HDS Live also to benefit from the 600W.
So given that it's a 165HW it will be limiting in what it can...

Uni-Plug To Blue Unit Adaptor Cable - Ta-Uq2Bl-T | Accessory | Lowrance USA
Would this be it?

Maybe the one here airmaremea_mixandmatch_cable_12x18_poster

So I got the Airmar TM165HW and the connector on it is not compatible with the adapter 000-13977-001 that is supposed to allow it to connect to a Gen3 HDS 7 pin blue connector like this one from...

I got the TM165HW but the connector from it is not compatible with the 000-13977-001 adapter 9 pin Airmar XD to 7 pin Lowrance for gen 3.
Amazon.com: Lowrance 9 to 7 PIN XD Adapter for AIRMAR XDCRS,...

And for bottom which is better from the more affordable stand point? The H or Ms? What about the L. I found 2 used ones through hull and huge, the B175H and B175L. The L seems wider and for deeper,...

Are these blackout s on the screen supposed to happen? It was probably when I changed settings.

So I finally went out to the lake 3 days ago and took some pics of the screens in action. Caught large mouth in the process.

So I just bought the TM165HW for 141 shipped including tax brand new. I sure hope it will do the trick. I know this is wide so bottom is wide but it's 600W and was going against the TM150M at 300W 80...

So I just bought the TM165HW for 141 shipped including tax brand new. I sure hope it will do the trick. I know this is wide so bottom is wide but it's 600W and was going against the TM150M at 300W 80...

I know this is wide so bottom is wide but it's 600W and was going against the TM150M at 300W 80 dollar difference. If I will need bottom I will have to get a thru hull B75H or M. But probably H. What...

I do already have an HDI that am using as sonar. I also have structure and down through a 3D, and just now I ordered the TM165HW. Water column covered. Was gonna get the TM150M but the 165 is 600W...

So I have been looking around and reading everything there is. I use gen 3s 9 inch and 7 inch.
I ran across these 2 Raymarine 1k transducers at 300 bucks each used can be adapted for Lowrance....

Sorry I meant B175L.
You mentioned above it would work from RayMarine to Lowrance with the mentioned connector.
Yes that's the marking on the sticker.
Was just a bit concerned that it's too...

Wow good to know there is such a thing as real clear Lowrance 3D SS. Cannot wait to see mine like that.
What screen are you using almost looks like an Evo3 resolution. And what sonar type.
Mine are...

Wow you are at the opposite end of the spectrum with the 3D transducer setup. SOme do flush with bottom some actually put it below by half inch and tail end pushed down a bit.
with your set up can...

Now for the million dollars question is it worth paying $300 for a used unit, to fish offshore in a 20 footer v-shaped boat? Have no clue of the depth I will do but will try to go to the little...