Search:

X 2 on the R ride in heavy Chop 2-3 foot waves very manageable.

I don't know what other people are talking about
I own a 2019 200g2 and a 2023 pro xs 250 and granted the G2 is on a R93 ranger and merc is on a 520 r
My first impressions are the merc is a big...

2001 R93 has wood in bottom of battery trays drilled for third battery and wood was on drill bit

This maybe a crazy but has anyone tried a raker22 ho on the Mercury?

🙏 sent

Ok thanks no very random might be a coil but not sure .
Has done this since 2020 the few times.i got to use it .
I have about 100 hrs on it and thought it was from the winterize process fowel the...

Guys I have been chasing this misfire for two years .
I have a 2019 G2 200 HLAH .
I am asking how does other people's G2 run ? Does it miss ever when cold?
I can't find the.cause of the miss.
I...

Update, Installed the new plugs and new on the motor fuel filter .
Engine still has random miss or hard slow speed miss. Hard but consistently happening when at low idle
I am on the third set of...

So I am 99 percent the oil was from the winter process.
I changed tugs two seasons ago with updated plugs because of the potential issue of the pads falling off and I was chasing the same sight...

To Big Hare what are your thoughts on this issue I have ?
Normal? Or worth persueing.
Reason I ask is because at idle this engine always seems to have a Random single hard miss or hard random...

So I guess my plan is put old plugs back in and run it.
Till I warms up then perform winter process again
And see if the starboard middle cylinder spark plug shows the same oil as the others.
I...

What model do you have the Hydraulic steering on ? Did it come that way? Or did you convert from DPS?

Looks like I need to rephrase the question.
Does anyone know where the oil for the winter mode comes from is my question.
Oil port or fuel Injector?

You can take that injector off as long as you put it back on you don't need to program anything.
Try it be patient I bet you can get it out.
Just loosen and move out of the way gently and don't...

Hello , I pulled my spark plugs because I wanted to check them after last season .
The Engine was winterized using the factory proces on the I con touch.
The condition was all plugs look normal and...

Where is the best place to buy Diagnostic EV6 for G2 ?
Can this be order though local dealer ?
Any idea of the price on this ?
Can you use Ev5 with G2 Cables ?
I see it on the E for almost 800...

Ordered a tiny tach off <EDIT>, should be here for the weekend attack on this problem again.
I will double check shutters nd linkage .
Some one asked me what the plugs look like and honestly they...

Let me ask this this is a 75 Hp running a 14x11p prop on a 20 foot pontoon (heavy boat)
Hole shot is decent but at full throttle can't get 4000 rpm .
Seams like Surging at full throttle rpm between...

Yes verified all #18 on all three carbs is in place.
On other carbs I have worked on in the.past you could replace
The needle and seat as a matched set.
This carb, only the needle makes no sense...

Yes , but the old float not bad in any way.
It has new floats . Had all new Mercury Carb kits installed in 2021
After this past weekend I am 99 percent sure the carbs are not
Deliving fuel...

So I took carbs apart again check level on floats they were correct but I set the a hair lower just to be sure.
Installed and pumped up primer bulb started motor still starts right up and runs on...

How would the motor runn if flow was set to low ?
I watched a you tube video when I rebuilt carbs and the video was not the same as the servce manual picture for the carb float setting .
I am going...

How can I tell if my carb float level is not to high and flooding.?
Eng seams to run better level or tilted up if tilt is down.it runs worse.

Hello ,
I have a Merc s/n OT463935 .
Bought used dealer said ran good and has good compression
90 psi all cylinders .
I test my self I got 110 on my Guage.
Problem is it ha always run like dog...

It has nothing to do with open or closed cooling systems .
It has to do with block / piston expansion rates and ring gap clearances
engine builders will tell you if you run a engine high rpm the...