Search:

Absolutely. Squirt some dielectric grease in there if you like, or if you want to go anal you can solder it together and use heatshrink with d grease, but it's not necessary at all.

Had something similar and it was pinhole in the gas bulb. If he hasn't changed it in a year, it might be an easy, cheap fix.

You may have to drill a couple of holes for the Ultrex, but that's easy. You just mark them with the ultrex in place and drill them through. The charger and battery are just connecting wires and a...

You could rig it up yourself without much trouble and save a ton of money. What are you wanting to install?

I don't know about the SX's, but the ZX's from that time were some of the most stable and fast fishing platforms Skeeter ever came up with. If it's similar, you can't beat it even with the modern...

I need to do this on my 98 model too, but haven't gotten around to it. The best carpet seems to be BassCat brand. And for cutting your box corners, see this thread. ...

I'd say why stop at Oklahoma? You can get bigger numbers and consistency a few more hours south. Lake tawakoni in Texas is a numbers machine, and it's right next to Fork which is great for big, big,...

And that's what makes it less than. That auto-deploy is the bee's knees. Launch it by throwing it in the water and driving off. It'll park itself and wait for you to park the truck then drive it to...

If you want your boat to be a robot and drive it around anywhere from your phone or your depth finder or the included remote (even from the shore) then go with the Ulterra. (It's fun to say "Go to...

How's the pee stream?

Congrats! Let's see some fishin' pix!

Haha! Been there, done that! I'm in OK too. If it's freezing I generally don't go out, but when I do I drain it out on the ramp (no one else is there) so i can have the boat tilted at a high angle,...

I pick up free firewood (cut and stack it yourself) the last three years, but before that I knew a girl that sold oak at 95.00/rick cut and stacked. 341-9003
Also there's about 4 ads on Craigslist...

For a poorly tuned carb...

That's one of the most reliable engines Yamaha ever made. Not sure why you think anything not FI should be unreliable or dismissed.... :eek:

Jermo, don't hijack someone else's thread. Just make your own next time.
For your parts, search the forum for Tinys Fiberglass in Texas. he'll probably have your dash parts.He ships slow though.

Hey Rich! That looks like a lawnmower blade. I like it! Does it get affected around rocks, brush? I hit both pretty often.

I used to love DS fishing with my kids but one 'yack goober snagged his first 5lber out of there next to us and started yelling the "F" word like he'd just found satan himself. I fired up the big...

That's what I'm talkin' about! Did you do it yourself or have it done? Looks sharp! 10 out of 10 and now you've got many more years ahead with her!

:thumb up2:

Do you have any better pictures? I can't make these out (too tiny). Maybe post them up on tinypics.com or something and link them up so they're not limited by the forum sizes.

Anyone know how this works exactly? I don't see anything listed for several lakes I've fished. If it's just not reported then heck we could have several lake records with 3-4lb bass.

I have the extra long shaft b/c I ride in rough water pretty often, so it does flex a bit (maybe 1/2"?) but again, it hasn't had any adverse effects.

IIRC the manual only says to put a strap over it to hold it when it's stowed. Personally I haven't done either, it just sits up there happy as you please unstrapped and stowed. Towed it over several...

I went with the Ulterra and it does hit the rollers but it's STRONG metal there, and it's mounted right so it doesn't hurt anything. My only two hiccups are:
1. I wish it had a way to run a...

This is right. At about 10am the idiots come out in droves and they'll ski right over top of you.