Search:

Type: Posts; User: long shot

Page 1 of 8 1 2 3 4

Search: Search took 0.00 seconds.

  1. Thread: Reflashing

    by long shot
    Replies
    5
    Views
    389

    I have a 250xs ecu if you want to see if any...

    I have a 250xs ecu if you want to see if any gains would be had by running one. I will loan it to you if you want.
  2. Replies
    4
    Views
    134

    The standard proxs and torquemaster driveshaft...

    The standard proxs and torquemaster driveshaft will work. The new "wingmaster" will not as it has different pinion splines and a larger shoulder by the water pump.
  3. Replies
    4
    Views
    422

    Is this fat shaft? Jarrodsanders62@gmail.com

    Is this fat shaft?
    Jarrodsanders62@gmail.com
  4. If the pulse pump is good, and the fuel lines are...

    If the pulse pump is good, and the fuel lines are not collapsed, make sure the lines are all tight. I have seen lift pumps not able to "lift" because of a small air leak due to a loose hose clamp. ...
  5. Replies
    9
    Views
    234

    Look at your coild and see if one appears to be...

    Look at your coild and see if one appears to be oozing marshmallows out of a crack. Mine had a failed coil and it blew the same fuse. The white, fluffy stuff helps track it down.
    Otherwise go...
  6. Replies
    8
    Views
    222

    Thanks rocketman. I talked to him the other day...

    Thanks rocketman. I talked to him the other day and I'll be getting them in a week or so.
  7. Thread: Sportmaster

    by long shot
    Replies
    4
    Views
    140

    I have a used, freshly resealed and new water...

    I have a used, freshly resealed and new water pump straight skeg 1.75
  8. I have a 797 that the screen is kind of crappy. ...

    I have a 797 that the screen is kind of crappy.
    Jarrodsanders62@gmail
  9. Replies
    6
    Views
    147

    I have a 26 never worked great shape. 325

    I have a 26 never worked great shape. 325
  10. Replies
    2
    Views
    35

    I may have one. I will check this evening. ...

    I may have one. I will check this evening.
    Jarrodsanders62@gmail.com
    If i have it, you can have it. It was a spare.
  11. Replies
    3
    Views
    264

    Just the motor by itself or with the trim...

    Just the motor by itself or with the trim cylinder?
  12. Replies
    6
    Views
    341

    I believe it is to allow more air flow into the...

    I believe it is to allow more air flow into the throttle body. I noticed the same thing. I doubt cutting tjat hole on a 250 will help, if that is what you're thinking.
  13. Replies
    8
    Views
    320

    Check the coils closely to see if one appears to...

    Check the coils closely to see if one appears to have marshmallows oozing out of the case.
  14. The 250proxs and the 300xs have the same trim...

    The 250proxs and the 300xs have the same trim setup so it should work if it fits the 225 and 250. Unless you have the HD offshore mid with a single ram and remote mounted trim pump.
  15. Thread: Sportmaster

    by long shot
    Replies
    4
    Views
    140

    Did you get one?

    Did you get one?
  16. Replies
    12
    Views
    612

    This will also fit a 300xs optimax if anybody...

    This will also fit a 300xs optimax if anybody needs one for that.
  17. Replies
    8
    Views
    222

    2 piece for the sportmaster or torquemaster? ...

    2 piece for the sportmaster or torquemaster? Sorry brother, I can't use that. I am trying to eliminate the weak links in these units and that was a pretty high failure part.
    Do you have anything...
  18. Replies
    10
    Views
    276

    Sei sells garbage knockoff mercury stuff that has...

    Sei sells garbage knockoff mercury stuff that has the same dimensions and spline counts so i used one of theirs for comparison.
    It showed the spline difference and the thicker seal surface.
    I...
  19. Replies
    10
    Views
    276

    45-895836 Look at this one. It has the groove...

    45-895836
    Look at this one.
    It has the groove in the thick portion like the one i have and it has the larger sealing surface.
  20. Replies
    3
    Views
    192

    I have done it before it is the same. Some have...

    I have done it before it is the same. Some have a 3 wire and some have a 2 wire motor for the trim. Check that.
  21. Replies
    6
    Views
    359

    Maybe the shop was using the bottom port to apply...

    Maybe the shop was using the bottom port to apply the vacuum and pressure and therefore sealed the leak while testing for it? Then reinstalled the leaking drain plug?
  22. Replies
    10
    Views
    276

    1E050739P Is my engine's serial number. We can...

    1E050739P
    Is my engine's serial number. We can use this as a base since my sportmaster internals are the same as the torquemaster. 1.75 fat shaft 20 inch
  23. Replies
    10
    Views
    276

    Thanks for any and all help you guys can offer. ...

    Thanks for any and all help you guys can offer. I have been trying to offer up any info on other requests so I am not just a taker here.
  24. Replies
    10
    Views
    276

    I posted a close up because i had to crop a ton...

    I posted a close up because i had to crop a ton of it to meet the 99 kb size limit.
    The only 2 differences i see are the spline count and the sealing surface is larger in diameter. The top spline...
  25. Replies
    10
    Views
    276

    349950

    349950
Results 1 to 25 of 182
Page 1 of 8 1 2 3 4