Has a small hole in crankcase.looks like rod bearing gave out and smacked the case..bout size of a dime..can that be welded up or is block trashed..
Type: Posts; User: mikestarkey
Has a small hole in crankcase.looks like rod bearing gave out and smacked the case..bout size of a dime..can that be welded up or is block trashed..
Thank you
What be best prop for 99johnson 150on 18 ft triton..also how much to rework a banged up raker prop in 24 pitch
Best prop for 99johnson 150 on a 18 ft triton
What's best prop for 150 Johnson on triton 180 premier
What hole is that motor set on..I got a 180 premier and only getting 54 out of it with a Johnson 150.
Thanks guys for info
What's the rpm range on this motor...
Guess I'm doin really good with mine then sounds like...im just always looking for that little bit more
Have a Johnson 150 on it with raker 24 pitch prop..boatvis a 180 premier...im running 57 to 58 tournament load and full live wells and gas...two guys...by myself I can hit 60...im turning 5100 rpms...
Have a 99 Johnson 150 on it with raker 14.5 x24 prop.tournament load im running 57 to 58mph with two guy's...by myself and half tank gas i can run 60...no jack plate. Would a jack plate help me gain...
Thanks for info...really saves time and helps a bunch
Where would be a good starting point for prop to pad height be for that boat and motor
Thanks for all the input guys.....cannot wait to get it tuned in....I always play it safe...don't need to run the max..just like to know what it will do...
what should a sf150 with 77evinrude200 and 8inch jack plate be running on top end..only getting 53gps as of now....thought I should be a lot more then that.. Turning 6000rpm on wot ....has 19pitch...
Have a 77 evinrude 200on a skeeter sf 150..running 53gps.what size prop should I be running...turning 6000rpms...have a 19pitch on it now.thanks
thanks for the sound advise pat.....was looking into puttin an older 150on it.......but if i wont gain much between an older 150 and my current motor will just keep my curent motor on it...i wont be...
ok thanks guys...any thought on what a 150 hp motor would make this boat run at with the proper settings and prop...trying to get most out of boat....will up grade motor if have too....
have skeeter sf150....it hasa 140 johnson with 19 pitch aluminum prop...my measurments are 3.5 inches below pad...jackplate and motor are all the way up....ran 45mph.gps. today at 5900rpms....anyone...
i counted each groove and came up with 13...the 4 1/4 i dont know about..how u find that out....my prop to pad is..and this is rough estimate is around 3.5 inches....didnt have level to get on pad so...
my motor is a 13 spline....will i need to get some kind of hub kit for that tempest plus..i assume i would since its a mercury prop...im new to all this motor setup.....have always just ran what was...
im runnin around 5000rpms and around 44.5to45 mph on gps.....thanks for your help
have a skeeter sf150..with a johnson 140...currently has a 19 pitch aluminum prop on it...what size ss should i go with for best hole shot and top end speed...also has a 8 jp on boat...thanks mike
i have a 87 skeetersf150 with a 78 johnson140....problem is it takes forever to get up on plane.....like 3 to 4 mins id say.......im runnin a 19pitch aluminum prop....think that may be a big...
i have an 86 150prov doin same exact thing. if you come up with something let me know please.i have tried everything but redoing the carbs. thanks mike