I just bought the boat, but the person I bought the boat from had just replaced the motor a few months before I purchased the rig. It seems like whatever is in the head that holds the shaft in place...
Type: Posts; User: Beast96Z
I just bought the boat, but the person I bought the boat from had just replaced the motor a few months before I purchased the rig. It seems like whatever is in the head that holds the shaft in place...
Just picked up a new rig with a less than year old 112 Fortrex on it. There seems to be a lot of slop/wobbling where the lower and upper shaft come together. There's a collar there with 2 Allen...
Had a 25P Fury 3. Bad hole shot, but ran well up top. Could only turn it to 5500 rpm. Just purchased the 24p Fury 4. We'll see how it does.
I have a 15' and its perfectly fine. Never heard of any issues.
Show me another bud and I'll be happy to eat my words. I saw another guy on here touting he had one, but he had a 3 fade pin stripe. Even the owner of Legend said they only made 2 and the other hull...
I sold mine a year ago for $26,500, but it was pristine and the only 3 fade ever made. It was loaded as well. Graphs, lights, power poles, etc. Wish I had kept it now. I would say the average 06...
I took mine to BPS when I changed my compressor. Told the guy I wanted to sequence done with the hand held computer. He came out to me in the parking lot and did it. Didn't even charge me. I gave him...
Seems fairly difficult to search for part numbers for the newer XS motors. Im doing fuel filter, impeller, plugs, lower unit oil, etc for general maintenance. I've got the plugs and filter, but I...
My pulley sheared off and broke all the bolts. I was able to use a cutting wheel on a dremel to etch a straight cut and use a flat head to get some of them out. Others that were more sunken were a...
Does the V20 fuel gauge stay on full longer due to the flat tank? I've never been able to get my gauge to come off of full, but it will fault to empty if I hit the aux tank button. (I don't have the...
No problem with that, but other than getting the tie from a dealer, what about the gun to pull it to 20lbs?
Compressor strainer was completely plugged so pulled it and cleaned out. I have a small hose clamp that is the same width as the zip tie that was removed, but wanted to make sure it was ok before...
I have seen them doing some buffing and maybe minor scratch repairs, but, the main weigh in site is so hectic that it's almost not worth pulling in there for. Guess it depends on how bad you want...
I currently have a 25p Fury 3 on my 15 V20 and when it's over 80 degrees or so, my hole shot is horrible. It's to the point I have to get the passenger to move to the front of the boat to help plane...
This will be my 4th year fishing. It's really a good tournament. As stated, good lodging fills up quick. You'll have to search if you're just now looking.
I had the Lowrance Lake Fork Marina card in my HDS-1 and did the gpx conversion to go to my 1040 Garmin unit. It worked fine.
I ran my PM-1 31 series from 2008 till 2016 when I sold my boat. Never had any issues on a 4 bank NOCO charger. There at the end, my larger console graph would restart upon cranking, but the engine...
Just curious which model rod broke? And do you really think it was a manufacturers defect after 9 months?
Is installation similar to the airmar? It looks like it is. I have a 1040 XS with the full network/downscan etc. I know I have the blue sonar port and nema 2000 ports in the back of the units.
It was my boat, and the hull and stripe was faded 3 times. However, I did not sell my boat for $21k. I let her go for $24,500, only to find multiple offers for full asking price of $26,500 in my...
It appears that my airmar P79 transducer is bad. If I'm going to have to by a new one, I want the best. Is that the best through hull transducer available or is there an upgrade?
I've got an early production 15' V20. 250 Merc, Bob's plate, PP's, etc... I've hit 74 with just me in it and 71 with a lighter partner. The hydro jackplate is the deal on these heavy boats. Just...
I didn't know the shear pin was prop specific. Seems like they just come in universal packs? No side to side play at all. Prop nut is tight. The mount is tight is all get out. It's a 2014 motor, so...
I have dual 1040XS units at the console and the traditional sonar is detected, but will not work. The transducer is the Airmar P79 thru hull. The transducer is ticking, and when I remove it from the...
I have a 36V Motorguide Digital Tour and it is smooth as silk in the stowed position. As soon as I put it in the water it vibrates like crazy at all speeds. Shaft is not bent. Used 2 different props...