Posted this over in the trolling motor forum also. Checking to see if there is a cable adapter that would allow a lowrance live to us the DI transducer built into the trolling motor?
Type: Posts; User: Hookedup2
Posted this over in the trolling motor forum also. Checking to see if there is a cable adapter that would allow a lowrance live to us the DI transducer built into the trolling motor?
Is there a cable adapter to allow the built in down imaging transducer in the head to be used with a lowrance live.
I just swapped out my ultrex and the Quest weighed 82 lbs. And my ultrex weighed 67 lbs.
I had the same problem had 4 holes line up and 2 were off going from the ultrex to the quest.
If the bow shroud is like the 919; yes. The 1/4 in spacer on my boat from the factory is not enough. I called Phoenix and bought a 3/4 in starboard spacer from them.
A 2015 919, and loving the Quest. Motor is a beast fished all day in 25 to 40 mph winds and didn’t kill my batteries like my other ultrex would in those winds.
I just mounted and ran a new Quest so here is what I know. Worth the money Yes. The bolt pattern was off slightly even after drilling holes larger on 1 hole in the back. Clearance was an issue on...
Fish obsessed is the only one to have a mount for the Quest. Called them and very helpful so got one ordered.
Just for an update just got a hold of the factory and they are using a 3/4 inch spacer for the quest to clear the bow shroud. Phoenix customer service is the best they put one in the mail for me...
Just installed a Quest on my 919 replacing my Ultrex and using the starboard that was good with the ultrex isn’t working on the Quest. The arm hits the bow shroud and needs to be higher. Checking...
Upgraded my ultrex to the quest and with the larger shaft size the factory AT mount is to small. Looking for a mount to fit the quest.
I have had my 919 since 2015 and 3 rangers and a stratos prior. If you think the stability of a 919 is something to worry about, I would stay out of a bass boat. The 819 and 919 are like driving a...
Thanks for the info.
I just ordered a Quest and did not see a new heading sensor on the list of included parts. Does it come with a new heading sensor or do I need to purchase one separately?
Thanks, I will look into them.
Looking at getting a new pellet smoker and looking for opinions on what brand would be the best one to get.
I don’t have a Ghost but fished a derby this weekend and a friends Ghost shut down on him. That makes 2 so far this year. I will stick with my ultrex.
Good luck I have that thing happening on an agm showing 13 volts. Called minnkota and they told me I have a bad bank on my charger.
Not to high jack 5his thread what upgrades to the TB is everyone talking about.
Had the seals go bad on the ram and removed it and had new seals i stalled at a hydraulic shop. Now I need to bleed the system. Before someone says call Bobs, I did and no help just told I need to...
Better fix it now. Replace and repack with grease and a bearing buddy.
Mine was out of warranty and had a bad cord. I ordered a new cord cut and replaced and now that bank is charging as it should.
Depends on the year of truck and rv. I have a 2020 GMC with a short bed and have never used my slider with my 5th wheel. The newer trucks have the kingpin sitting back more and the newer trailers...
You have to turn on stableview to correct.
I changed mine out also. I left the ramp and no oil leaking drove 40 miles home and oil everywhere and ruined bearings. When the oil bath work great but just imagine you just filled up and while...