I have a 2006 ranger and the oil caps screw on they are black with a rubber plug to check the oil
My 2003 had the clear caps but they still screw on
I found new ones in Trailer Super Store look up...
Type: Posts; User: Don C
I have a 2006 ranger and the oil caps screw on they are black with a rubber plug to check the oil
My 2003 had the clear caps but they still screw on
I found new ones in Trailer Super Store look up...
Run down the lake and keep throwing gear out till you get back to 70 MPH
I like my L1 but at 78 it is time to slow down :laugh:
I did the seam I did the hook holes I use 2 boxes of Tear-Aid
5 Rangers boats and I still fixing the seats they don't last long and I fish alone :thumbsdown1:
PS-If you use Tear-Aid make it fit the...
TEAR-AID Vinyl repair ( Type B ) Elastic patch that won't pull off when stretched :nanner:
I order 2 bearing race from etrailer after 25 days I cancel the order got them from Trailer Parts Superstore in 4 days
They move the shipping date every week later and later and parts were in stock...
THANK YOU
Go to www.etrailer.com
last fuel filter was 5009676 the new one they gave me was 5011090 they look the same will this one work ?
Model E200DHLSDF E-Tec
I have a 2006 and I get my seals from TrailerPartsDrpot
I get all my trailer parts from them
parts# 81313
Check KILL switch
They call them SHALLOW WATER ANCHERS over 10 feet to me is deep
I love my new 8 foot pp now if the ICE would melt so I can try them
They work great on the trailer
There is a hole on the left side of the trailer next to the actuator pull the actuator all the way out put a pin in the hole will stop the actuator from moving
This hole is for moving the trailer...
I got to go up
The hydraulic release valve was stuck
Glad I had that big hammer
I think there is a reverse lock out with the lower unit out it wont release so I can't lift the motor back up to fill the trim
I hope by putting the lower unit back in it will release
I change...
Took lower unit of to get strip threads fix then change oil in the trim drop motor down to get all he oil out now can not get the motor back up to fill trim back up
It will only move 1/2 inch can...
I just put new power poles on my boat but the hoses come out of the middle of the mount the installation book show the hoses coming out the sides of the mount they don't show anything about...
Got them from Power Pole
I fish in NH and belong to two Bass Clubs
They recommend Dual Plate Kit M-2-6
replace bottom bolts only ( to short ) top bolts OK
I just put them on my Ranger 519vx they are 1/2 inch thick
What if I am going down the highway at 75 or down the lake at 60
I just did mine and did it like scotti509 said just remember the bracket are 1/2 inch thick you at need longer bots I did on the bottom only
You only use the jack to take the pressure off he bolts...
I do my seals every year change oil every year that way I feel safe on the road
Yes fill to bottom of rubber plug and yes the hub has to be threaded they are Tie Down Engineering oil hubs
2006...
I put Gatorbak on my trailer last year and use boat every week end all summer and my bottom is gray and I don't see any scratching best thing I did
If you go to Trailer Parts Depot you can buy 2 oil bath caps for $18.74 you pull the rubber plug in the center and fill with oil better then trying to get that small plug out that all ways ends up...
I used my old boards they are 2x6's
If the bunks are dry boat will not side on they have to be wet
You have to get them wet first