I've heard good things about Cleason's Boat Repair in Lebanon.
Type: Posts; User: Buckeye492
I've heard good things about Cleason's Boat Repair in Lebanon.
Not feasible for those of us up North. Can you get the material & DIY? It doesn't appear so on the site.
scotty34, where in York are you? I am in Red Lion. I decided to start hogging it out tonight & found that there is a piece of fiberglass in between the sheets of plywood that complicates things a...
Did you also replace the knee braces with the Seacast / Arjay? I am trying to figure out how I am going to remove those without cutting fiberglass somewhere.
Arjay 6011 vs Seacast. Does one have an advantage over the other. The repair process for both seems pretty straight forward.
Fair enough!
Are they legal in PA? I've looked through the regulations, but don't see it specifically addressed. I'm trying to figure out how to mount the bow light without blocking it with the trolling motor. ...
I just use Google Drive & organized by Main ingredient. Works well & I have access whereever I happen to be at the time.
I see a 90 degree fitting screwed into the adapter plate that has a hose running to the control valve. Is that the right line?
Are they difficult to install? I do have a spot to mount the gauge, but I'm not entirely sure where to hook it up on my motor.
I've seen many posts where people show their water pressure. So my question is are they necessary? My boat / engine didn't come with a guage and didn't know if there was a benefit to installing one.
This is just one more thing I have found with this boat. The previous owner obviously didn't understand what they were doing. The aerator fitting is quite messed up. Looks like someone took a pair...
Well, I enlisted the help of my son so I could see what was going on. The shift rod what hitting the edge of the housing & ended up getting pushed into Reverse. I was able to break it free, move...
I pulled the lower unit to replace the water pump on my 1989 Evinrude E140TLCEB. Pump change went very smoothly. However, when I tried to reinstall the lower it seems like I am hitting something...
Found another thing tonight that the previous owner messed up. I was looking in the front live well and the fill line nut was on backwards (easy fix). The aerator fitting is another story & needs...
1987 Monsters of Rock - Nuremburg, FRG. Cinderella, Deep Purple, Ronnie James Dio, Metallica, Ratt, Helloween & Pretty Maids.
The prop on my motor is really banged up from the previous owner. I've looked up the props that are listed for the motor & there are literally 20 different choices. Can someone give me some insight...
Can I get the info as well? My bow panel is cracked badly.
Thank you!!
Does anyone have a source for a used applique, PN Evinrude p/n: 0210305?
Very interesting! As always, thanks for the insight!!
Might be worth a trip north with my boys. Have to get the boat put back together first. Thanks for the info! On another note, are there any online charts of the PA waterways?
Do they make magnesium anodes for this motor? It has aluminum / zinc from the factory. I have been reading that magnesium is better in freshwater than either aluminum or zinc.
Not sure how much this will help, but here is the wiring for an 1988 Champion. I would think the switch wiring would be similar.
356291
Got around to replacing all the switches & breakers in the console & bow panels. I noticed that I had one red (crimped together with all the other red wires) & one black wire that was not connected...