Search:

The manual states 22.5 oz capacity for the lower unit gear oil. I have filled it till the oil starts to come out of the top vent hole and then plug the vent hole, remove the fill tube and quickly...

Wanted to provide all an update in case anyone has the low temp issue. I was prepared to remove the powerhead and adapter plate but before I did that I figured I would replace the air pump screen...

Thanks Don for the response and PM. Posting here so others may benefit.

I am going to try and put the old poppet back in and see if that makes any difference. If not I can go down the path of...

Hoping someone can help me figure out what to do next. I get the single beep alarm that the engine is not reaching operating temp at idle (~140 degrees). I changed the water pump and get a good...

Brand new, just picked it up last week. Only been run on a hose thus far.

I have black oil on the cavitation plate on the port side of my lower unit. It doesn't appear to be gear lube but rather dark engine oil. I have a 2007 ETEC 150 and using xd-50. Is this normal? ...

New ETEC Owner. WHat do you all recomend for fresh water flushing? Flush Port, Rabbit Ears? Engine on or off?

Thanks for your help

I'm told the 4yr extended warranty was opted for. Handled by an insurance company outside of BRP.

It's on a 2007 Wellcraft Fisherman 202 I'm looking at. Do you all thank the 150hp is enough? ...

Can someone help with any info on the following engine? E150DPXSU 05172874.

Thanks guys, great resource you have here!!