The bow light lens is cracked and now doesnt work. Most likely water intrusion. I ordered a 51164 dual bow light and its a little smaller. Does anyone know which one skeeter uses? I also have to...
Type: Posts; User: Mark L
The bow light lens is cracked and now doesnt work. Most likely water intrusion. I ordered a 51164 dual bow light and its a little smaller. Does anyone know which one skeeter uses? I also have to...
I had this issue with a 250 sho and it had to do with the fuel vent valve. it was stuck closed.
I have a 2016 ZX 250 and want to change props. Have heard the Fury is a good one to use but do not know which fury and hub kit to get. I currently run a 25T2.
Is this an EZLOADER trailer or Skeeter built?
My ZX250 has 6 dots and I can hit the rev limiter with no problem. With a 25 T2 prop. I can easily run 73 and have gotten more but its hard to monitor the the RPMs so I dont get into the rev...
The charcoal filter is the long black filter mounted in the rear port side accessed through the small removable panel on the deck. Yes I had the gas cap on. Its fairly easy and definitely worth a...
I had the same problem. It can get so bad it will compress the fuel tank and mess up the sending unit. I was told to replace the fuel filler and vent assembly which would not be an easy task. What...
409058
Mine will shoot the water out higher than the motor but only when I pull the nozzle out to just the right place. You can pull it all the way out to where its off and laying in your hand then...
Mine has the same issue. When you turn the unit on it beeps and shows carbon keep pushing the power button until carbon goes away and comes back and you hear a second beep. Then it will boot up but...
I have had to re-edit the overlay multiple times because the device will show not valid. So it works but for whatever reason the data source selected for TEMP will be invalid and I have to go back...
I changed the data source for TEMP under the edit overlay menu. This shows TEMP now but it is not acurate but thats out of water. I will have it on the water most likley friday. I will post after...
I have an HDS 9 Carbon connected to the transducer installed in the minkota fortrex. I have gen 83/200 as transducer type selected under installation. But water temp says no source and it is not an...
I had the exact same symptoms. Mine actually had oil comming out of the top breather intake. Water was getting in from internal anodes leaking by and actually pushing the oil out. Mine is a 2016...
YUP thanx for the input. I even told them that before they hooked it up to the lap top. That said the sensor plug was not real obvious with where it is placed. Had to remove dust covers and really...
I took it back to the shop. Computer had a code for CAMSHAFT position sensor. Removed dust covers and that reveled an unplugged sensor. They plugged it back in cleared codes no new ones popped. ...
I was able to get 6K RPMs and about 70 on GPS. The hole shot is still different then what it used to be. One thing I do notice is it takes longer to get to full speed. With the other power head it...
I need to take it out and get my foot into. Make sure I can still get 6K. I did call the repair shop and they were leaning toward VST filter. But this engine only has 218 HRS on it. It needed a...
I have a 2016 ZX 250. The 250 SHO had 218 Hrs and the power head had to be replaced. I got it back last week and as I go through the break in period, currently at 4.5 Hrs, I have noticed the hole...
If you have power poles just hook them on the power pole bracket. I just drove mine to AR and back with the cover on and had no issues. I also put big inflatable balls two on the front deck and two...
The deck grid paint/ powder coat definitly bubbles up then flakes off. I have had two ZX boats and they both did the same thing. It is worse in the back where the live wells and back compartments...
I have a 2016 ZX 250 the compartments don’t leak from the rain. They do condensate to the point that I pretty much keep the boat compartments empty when not in use. What Skeeter needs to fix is the...
If you listen to Jarred then Jeremy hasnt caught a fish all year. Just sayin. Just to steel some thunder Matt and myself havent caught a fish all year either.
www.cattteamtrail.com
Looks like CATT is going to have tournaments in Tidewater area. Check out the CATT website tidewater division.
