Thanks bassmeister I'll heed that warning! Spent some time this afternoon replacing the line from the tank to the bulb. I found the anti siphon valve, it was attached at the splash well; the fitting...
Type: Posts; User: danman181
Thanks bassmeister I'll heed that warning! Spent some time this afternoon replacing the line from the tank to the bulb. I found the anti siphon valve, it was attached at the splash well; the fitting...
Thanks, I'll see about changing all the lines. I have this problem though where if it's nice enough out to work on the boat it's nice enough out to fish so fishing usually wins! ;)
Thanks Championman.
Anything special or specific about EVdiags or just get it from Ebay?
The motor is new to my old boat, a 1990 Cajun. Is the anti siphon valve usually attached near the...
Hello all, I have a new to me Evinrude 115 E115FPLSTB. It runs and sounds good. I have a few questions that I have been unable to find the answers to.
The easy questions first:
- What are the max...
Rpms are around 5600, if I trim up too much it blows out and goes to 6000. Prop is a 13x19, holeshot is not horrible but the prop was cupped to supposedly help. With my dad in the boat (~330 lbs) I...
I thought it seemed a bit slow, it had a 120 on it, I didn't realize it was rated for a 150 when I repowered after the 120 blew.
Looks great! How fast does she go? I have the same boat but with a 2003 evinrude, goes about 45, not sure if that's low or to be expected!
I feel silly asking but are you using the throttle at all while turning the key?
Hello, according to the marina that my boat is at, the motor is blown (connecting rod or rod bearing). I'm not sure how they determined that but that's another story.
My question is, how...
Heard from the marina today. They have replaced the spark advance link assembly and adjusted the carb floats. They say the boat is running great except idle to 1200 where it "runs horribly" and is...
Could a broken spark advance link rod be causing my problems? I may have mistaken a misfire for all around horrible running...
Hello, looking for help with a misfiring 1991 johnson 120 vro. Seems to misfire at idle and all the way to 5k rpm. Top speed is down from ~43mph to 25mph. It was working fine, docked it for ~7 days...
I'm not sure of the prop to pad. As it stands now it is working great. I'm happy with 40 mph's, my lake is pretty narrow and for now 40 is sufficient!
Just an update:
Pulled the boat out of the water (it stays moored all summer) and managed to remove the entire trim system without doing anything to the motor. Took the trim motor apart and found...
Getting power all the way to the motor. Doesn't draw any power from the battery when trying to ttim. Guess the motors shot, hopefully can find one today!
I can't even see the trim motor let alone hit it with a hammer lol.
Thanks for the help!
I reversed them and nothing. Fuel gauge has stopped working again?
How much is reasonable to pay to have the trim motor replaced, $100 an hour labour.
Also just noticed that the trim clicks the same wether the blue/green wires are connected or not..
Ok i hooked the booster cables up to green and blue wires, positive on one, negative on the other. Positive sparks but trim motor doesn't move.
Fuel gauge is working again after not being touched...
I'll try connecting the ground wire first maybe, too many sparks the way I tried!
Hello, looking for some help here. Currently the trim (both up and down) as well as my fuel gauge have stopped working. The only thing that I can remember happening before they ceased to work was my...
Picked up a 13x19 aluminum. Boat now gets up on plain much easier, revs to about 5k rpm and gets 40mph. Not exactly what I was hoping for but getting up on plain is a huge improvement.
Thanks for the advice all. I wouldn't be surprised if it never ran 55 mph, although I didn't get the impression from him that he was trying to upsell the boat. He owned it since new in 1991.
I'll...
Well I don't have much to compare it to but I think it's ok. It idles and runs pretty good, just feels like it should have more. I've not done a compression or leak down test.
Hello, recently bought a new boat and the prop was pretty chewed up. Previous owner said he ran it thru some sand. He also said the boat used to run about 55mph, however I can only get it to ~42.
...