No luck with Carol C&O either. Look like The boat is going to a Fiber Glass shop. ☹️
Type: Posts; User: Such5
No luck with Carol C&O either. Look like The boat is going to a Fiber Glass shop. ☹️
I have seen it on here multiple times that all you have to do is give your local Triton Dealer your Hull Number and they can get you the color-matched gel coat. It's super easy.....they said. ;-)
...
Last fall I hit a smallish log that came out of no where. Amazing how fast those logs can travel when you are going 70+ mph! ;-) Broke the Prop Shaft off inside the lower unit. I instantly backed off...
The silver part threads in. I think the Nylon Nut is just there if you want to thread that on the inside of your boat/transom. I just screwed mine in hand tight and it has never moved.
I do not think it could fail full open. Maybe leak a small amount, if something got stuck in it. That is why I said I have had it for around 8 years with no issues.. I fish a lot, so it's not like I...
406321
This Auto Drain Plug may be the best purchase I have ever made! I never have to worry about taking out or putting in my drain plug ever. I have had this installed for about 8 years and it...
Amended Post!!!! I do have a tempest plus 26 pitch!!!!!!! Not the 25 pitch!!!!!!!!
I have the exact same boat and motor. Although I can never remember if it's an '06, '07, or '08. Anyway, the...
In my mind Marc Marcantonio is correct. I don't know about all outboards, but I have one old one that will release and tilt up if you strike something in Forward gear. It stays locked down in Neutral...
My biggest issue with the trolling motor having a fairly significant angle is that my 2007 Triton Tr200 has a similar angle so it seriously compounds the issue.
Do you know if it saves it so you don't have to go in and select prop "auto on" after the initial setting change?
?
Anything on this? I just bought a Great Lakes V3.0 and I’m having the same issue!
So if I level out the front deck of my boat I actually need a wedge that would be 2 inches thick to perfectly level out the trolling motor! Actually for it to be perfectly perpendicular to the front...
Yup, that's it! I never noticed it with my Motor Guide so I'm wondering if Minn Kota has built in some angle on purpose so it has compounded the issue? I'm thinking it would make sense that an angle...
I did a search for "Triton boats with ultrex" with no real relevant returns? I mounted my new Ultrex on a 2006 Tr200 X2 and it has a serious forward lean! I am waiting to see what it looks like in...
I got a file from Humminbird and got it going. So far so good. Went from 2.700 - 3.000, then 3.000-3.040 with no problems. Just ran out of time on my lunch break to finish the last update, but I...
"Software version 3.040 must be installed prior to 3.110. No damage will occur if 3.040 is not installed, but the update will not be successful. 3.040 is also included in this zipped file.
•Once...
I've seen that exact explanation for 3.040 to 3.110. But not for 2.700 to 3.000. As a matter of fact it wasn't until late in game that I was even able to find that there was a 3.000. Thanks for all...
Bob, I "think" you are correct. Thanks!
Wayne, I am 99.999% sure I am in "Normal Mode". Powered up the units just like I normally would. Did not go into "Simulator Mode". Sounds like I may need to update to version 3.000, then 3.040, then...
I am trying to update from 2.700 to 3.040, so I can then update to 3.110. It asks if I want to update to 3.040 seems to be loading and installing correctly but eventually I am getting a FAILED screen...
I get the idea that the larger the holes in the plugs, the easier the prop turns, thus getting you out of the hole faster. But where should my RPMs be while coming out of the hole? Is that the idea?...
I have a 2007 TR200 with a Pro XS 250. So same boat/hull but slightly different motor. I run a 26p tempest plus and was told from the main setup guy at Triton that the 26p tempest plus is with out a...
Johnny Ray terminals looks exactly like what I was thinking! I think I'll give them a try.
I am wondering if there is a better way to make multiple connections to the battery? Right now I have the main motor power wire, 2 power poles, 2 Humminbird Onix Graphs, and it seems like a couple...