Ultrex is 4 years old. Last time out, when I hit the spot lock button, the motor turns on high and goes whatever the direction the motor is pointing. It immediately spins 90 degrees and goes back to...
Type: Posts; User: Scud
Ultrex is 4 years old. Last time out, when I hit the spot lock button, the motor turns on high and goes whatever the direction the motor is pointing. It immediately spins 90 degrees and goes back to...
I have a 189 trx and there is space between the rod locker and center box. I placed my black box in the forward part of the rod locker. I used screws but I could have put a bolt and nut on the most...
Installed two graphs at console on a BBT mount. After a rough day on the water noticed dash was loose and found that the screw in the shroud had ripped through. Anyone had this happen and what’s a...
Going to wire up some new Garmin graphs. Going to run 10 gauge wire from battery to units. How do you guys connect the 10 gauge with the smaller power wire on the graphs?
Do they usually have a Memorial Day sale? Any discount codes out there right now?
Pmantle. How do you have your transducers mounted? A picture would be great. Thanks for the response.
Anyone running Garmin and Humminbird at the console? What is your transducer setup and any interference between units? I have a g2n Humminbird and thinking of buying a Garmin 106sv to link with...
Anyone running Garmin and Humminbird at the console? What is your transducer setup and any interference between units? I have a g2n Humminbird and thinking of buying a Garmin 106sv to link with...
I fished the upper end on Tuesday and temp was 40-42. Caught 2 largemouth the first hour then nothing the rest of the day.
Jack plate and hotfoot come standard on the 18. They are add ons on the 189.
Purchased a boat this way back in 2017. . Boat had never been in water. Local dealer had the same boat with same setup as the boat that I purchased and I saved $8,000. Had to drive 12 hours one way...
A renegade tournament started today and going through Saturday. I think there is 150 boats in it. So probably a busy weekend with this tournament and folks prefishing for the FLW next weekend.
Several good fish are caught in the winter floating a fly when it gets cold, late December January. Hit or miss in the fall.
The FLW will probably have around 150 boats. Smallmouth will probably still be deep since the lake is still warm and no real cold weather forecasted. Swim baits and football jigs.
I have an XTM 9 MDI T transducer and some networking cables for sale in the Electronic section if anyone is looking to purchase.
The g845 is a 1” bracket. Fit perfect on my 2017 189. Assume the lip must be smaller on the OPs boat.
413744
The RV Designer G845 is the exact size of the fiberglass lip. They do not hangover like in your picture.
Signature Series part# SX150P-40. (You will need one for each rod locker; total of 2.)
Signature Series part # SX150-60. (This is for the center storage compartment. You will need two of these.)
...
Put a 31 in my 2017 with a new tray.
I have a Helix 9 Mega SI G2N at the console with the mega si transducer and a in hull sonar puck connected by a Y cable. Both have worked fine for 2 years. Yesterday lost signal from both...
Thank you for the quick response.
Looking to buy an ultrex 80/45 MDI with I-pilot link and will be hooking to a Helix 9 Mega DI G2N. Can I hook this direct to the helix with just a MKR-MI-1 adapter or do you have to use an Ethernet...
As others have said, Cordell is a river lake, so be careful if you get outside the buoys.
Will the mega DI transducer built in the Ultrex work with a Helix 9 mega di G2N?
