Exactly what is the defect they have that the update reveals?
I updated and still have some interference from MK Ultrex after using and testing all the interference filters on my Helix SI gn4 and...
Type: Posts; User: hookbender
Exactly what is the defect they have that the update reveals?
I updated and still have some interference from MK Ultrex after using and testing all the interference filters on my Helix SI gn4 and...
I bought the 2.5" dia because I thought with MegaLive with TargetLock, ultrex and transducer would need that much space, now I'm thinking the 2" might be plenty big. Shipping seems a little high.
...
Great kit with great results, thanks Ron!
Heat
Are AGM batteries okay to use on Yamaha 2 stroke outboard motors?
The option for TargetLock to scan side to side is not always available on my Helix menu. How do I get to it when it not listed?
Interesting how the 2D image shows the same shape as the ditch in the thermocline?
Data1960, Does the Helix you use to view/control the ML/TL indicate "GPS + Heading Sensor" on the Helix Accessory test and identified as "External GPS/ Enhanced or 3D" on the GPS Diagnostic View when...
On page 42 in the manual step 5 says to confirm Mega Live, Mega TL and GPS + Heading Sensor are listed as connected.
My Helix does not list "GPS + Heading Sensor" on the Helix Accessory test, it is...
I think would try to update again (if you have not) and if it continues to power cycle off and on HB is the place you will end up. If Wayne P. will provide answer, I'd go with whatever he says.
No one else installing Mega Live with TargetLock?
The power wire for the ML/TL Ultrex is a little thick, 14 gauge?, and 10' long.
Are any of you running 10 gauge to it?
I was hoping to just put a fuse in and connect it to main switched wiring...
Bill, I really appreciate you publishing these instructions. Can this set up fit on a Ultrex with a Mega 360 on it?
I plan to add another Helix 10 on bow for Mega Live. Do I need to run another 10 gauge wiring cable from the battery for adequate power or can I just tap the current power cable?
Thank you Wayne P.
Is the Humminbird transducer ID label on the wire close to the transducer or near the connection?
Balzout
How deep should the step be (toe to heel)?
Would a XNT 9 SI 180 T work in place of XTM 9 HW MDI T?
Darn
How do you know if they are low? I can’t see into mine.
Got it.
Some technical conflict prevented compatibility.
I’ll just have to piece together something.
Thank you
Jed
I know my early Ultrex does not have a built in MEGA transducer. It is built in and 2 to 3 inches in diameter with a temp sensor.
After looking at the pictures on the HB site, the cable I described...
The only part numbers on the Y cable that is installed are 490538-1 and 200528870108 and I can not find what cable this is, Think I've got the wrong y cable?
Where are the choices for "Humminbird...
How do I find and enable the I-Pilot transducer?
I can't seem to get a digital depth reading on M360 screen unless I choose the transducer from another console unit.
Those transducers in the...