Interesting... Thanks for sharing
Type: Posts; User: wpb79
Interesting... Thanks for sharing
Being somewhat knowledgeable in engineering calculations, I am genuionly curious how these numbers were calculated. Moment = Torque = Force x Distance. So your numbers show a modern transom should be...
The contractor will purchase the asphalt from a supplier by the ton. Get the dimensions of your driveway and use a calculator like this one https://pikeindustries.com/products/hot-mix-asphalt to...
I took my voltmeter out and put my pressure gauge in that hole. It was the same size and brand so it fit perfect and the lights plugged right up. Didn't need the voltmeter because I have it on the...
I went with an Anderson SB175 plug when I replaced mine two years ago. They are cheap, have a secure connection and are rated for way more than enough amps.
Gotcha Plugs... Forgot what they were called, but that's what worked for me
Last time I was there I fished from the east jetty and caught some spanish mackeral and a variety of several other fish. It was a pretty fun morning for not really knowing what I was doing. I just...
I installed stainless spring lifts that I got cheap off of ebay on the two front compartments just like the one that was installed on the middle rod locker on my boat from the factory. They don't...
Finally got around to looking into this and you guys were spot on. I bypassed the boat wiring and the trolling motor worked just fine. I was convinced it was the control board. Just wanted to take a...
Was out fishing this afternoon and the trolling motor just stopped working all at once. No power in MOM or CON. Got 25.6V at the plug. Took the bottom plate off the foot pedal and tested voltage...
Thanks for the reply. The time to charge is not a major concern for me. I guess I was trying to find out if either way would be better for the batteries
Ok, so I'm going from a 12V to a 24V trolling motor setup. I use a noco g7200 battery charger which has the capability to charge either 12V or 24V. The charge time should be the same with either...
I just replaced the bearings/seals on my 2008. The bearing kit that fit mine was for a #84 3,500lb axle. It consisted of outer bearings/races L44649/L44610, inner bearings/races L68149/L68111, and...
First, let me introduce myself. My name is Billy, I live in Mabelvale and I am new to BBC. I have been fishing since I have could hold a fishing pole. I fish as often as possible (usually a couple of...