Search:

[QUOTE=EuropeanAM;6129028]Hopefully that's not a VARIANCE of 8" hg (which would NOT be acceptable).

Ok thx, I have some more specific info. the mechanic said the pressure results were as follows:...

thanks, will pass that on

Ok folks, sorry for the delay. here is the serial #0G893066 I think. its hard to read.
also I have vacuum results. said it was 8 inch lbs. They also told me they have discovered if you manually...

I will try to get the serial number today and post it. compression and spark were good. timing was checked and good. carbs were rebuilt so I would think all the screws were cleaned and reinstalled....

99 4 stroke 50hp wont idle. he has rebuilt carbs, put new part, (something to do with the choke on this particular motor), new fuel filters and tried auxiliary gas tank. will start and run at high...

Im not the most knowledgeable person here but it appears to me you will never see a shadow beyond that piling. it is a solid object that the sonar is not passing through. as far as the sonar is...

Thanks Robert. I always use clear mode. 83/200
the position of the ducer is exactly the same as before. In the clear lake I got in the water and looked at the angles. looked pretty good. I probably...

WOW

Thx rback. good point about the speed, hadn't thought about that. also, the blue was really rough water.
as for gps, I deleted the waypoint so I cant give gps. I can tell you where it was if you...

THANKS :thumb up2:
any thoughts on the other pics?

any thoughts on exactly what is appearing in the images? like that solid red return on the 2d in the 3rd pic

My eyes must be bad then, I cant see them.
But hey those clear water pics are pretty huh.

HI all. Look what I discovered!! Look at the difference in these pics. Settings were exactly the same, except for color. The real difference was water clarity. First 2 was murky water, others clearer...

2d was both.
my 2d is ok I think, its my DI I have issue with.
also I just wanted some opinions of what appears on the screen. as I am new to HB and Si I am learning to interpret

Robert you did it again, LOL you didn't read all. had to speed up a little, water was coming over bow had really bad swells. and there were 3 pics, not 2.
I have changed the colors since these...

what would cause that and what is the fix? I do get that line occasionally

thanks guys for your input.
hoping for more.

In pic 1 and 2, I think the lines were caused by very rough water. anyone seen this before? and on the right SI is that fish? And the DI, I think the "cloud" is water disturbance. And compare the 2d...

I don't know about a reset. you mean to factory default or back to older version? The update did take. I checked that.
how about some interpret on the fotos? you see fish on SI?

Robert, I don't think you read my last post well. I said I started with his recommendations. when that didn't show anything, in desperation I adjusted the settings to outside normal trying to get...

Robert, I had at recommended as per Doug's video. wasn't seeing ANYTHING on Di. note the last pic. that was normal settings. I changed trying to get some detail. I am seriously wondering if the DI...

DI on my unit sucks. Fish don't appear, there is simply no detail. I even run up the sens really high in testing. as pic shows.
http://i1022.photobucket.com/albums/af345/dpeslinger/S00009.png
...

Got it installed. Had to do some customization but works good.

out of the box it has this transducer: XNT 9 SI 180 T
It is capable of using the upgraded hi def ducer also: XHS 9 HDSI 180 T

Is that the option?

I just bought a 999 to install on my toon. Sure hope I don't need additional ducer. plan on trimming up the motor for SI