I have a Fuel leak on the top of my port side fuel rail. From what I can tell it looks to be coming from the metal Crimp fitting. I looked at the O Ring and it looks to be in good shape. Is this a...
Type: Posts; User: Tritonx207
I have a Fuel leak on the top of my port side fuel rail. From what I can tell it looks to be coming from the metal Crimp fitting. I looked at the O Ring and it looks to be in good shape. Is this a...
Thank you. Must have been an issue with the loose ground wires this whole time. I wonder what else did not work right that I did not know about? May be the fish catching ground was loose also!!!
I Have a 2007 21x2. Took out of storage this spring and in my over all checks I noticed that the Bilge pump was not working with the console switch. After switching pumps it still did not work. I...
I have the mega 360 i have a H10 chirp MDI gps GN2 with that work with the mega 360? Is the "Mdi" mega
?
Can i hook up a 360 imaging to a Helix 10 chirp si gps G2n??
2007 Triton 21x2 Merc 225 Pro xs 2008 1b555738
The previous owner of this boat Removed the Gauges off of the dash to mount the electronics. That included removing the speedo and gas gauge. I would...
I have a 2007 21x2 Pro xs 225 that I just switched props. I went from a Fury 25 3 blade to Tempest 24 3 blade. It helped the get up and go factor but once I hit 55 the boat walks. I was told the...
THe tag reads like this: h10 chirp MDI gps G2n
My other units are SI i believe.
So i have 2 helix mega 10 units at the console and one Helix Mega 10 unit at the bow. I have them all linked together. I am have a issue with the one at the bow. I want it to read from the Built in...
awesome Thank you.
It looked like i pissed my pants yesterday coming off the water with the speedo hose spraying on my lap
When I bought my boat ( 2007 triton 21x2 w/ 225 proxs) The old owner took the gauges off the dash to mount two Mega 10 units. I notice that he had the speedo/fuel gauge still hooked up but hanging...
We got it figured out. Here is what we did,
Replaced the Impeller , gaskets and Plate.
Flushed engine out and all water lines.
Tested thermostats
inspected the lower unit for blockage.
Took...
I have not let it overheat since it happened . I did not see what the temp was i shut it down pretty fast.We went back to the launch and cleaned the strainer (it was covered in weeds and broken...
Nothing new no change to anything. I did look under the shift cover and no debris. It ran fine on Sunday all day
I ran it this afternoon with all the new items and flushed out , still having the same issue. I took the lower unit back off and it does not have any debris in it to clog it. The stream is good...
Could this be a Poppet valve gone Bad????
Thanks Don, I did check all the those and flushed out and replaced the impeller plate and gaskets. I did notice that part of the upper gasket was missing maybe 1.5 inchs on the side. looks like...
2007 Pro xs 225 s/n 1b555738
Had the boat out at the lake yesterday. Got about 2 mins at close to wide open and the over heat alarm went off and Vessel view mobile app said over heat. Let it cool...
They were lower that is forsure. i did not look at them at 68 but when i am running 63 i am only pushing 5250
So i borrowed a tempest 26p from a buddy that Mark worked for a proxs 225 on a 20ft triton. I was alone in the boat and hit 68mph then the walk started. I can run at 65 pretty good but i feel like...
I do agree I don't think the boat will push 70+ but i would like to see 65mph with a tournament load. I don't think that is out of the limits of this combo. I believe i did read his info. I know how...
I am in the Green Bay Area.
Good Day, Looking to get a little more speed out of my 2007 21x2 single console . I have a 225 proxs with a 24p fury prop. It is set at 2.75" prop to pad. I had it out on a flat calm day this...
Made it out on sunday north side No ice but water temps down to 36 to 38 degrees
How would i check to see what it has? Were is it located?