Search:

Drained and replaced the filter. It seated down all the way as it should (unlike the old one). Finally got around to running it on the water. Fired right up, ran great! Even sounds "smoother" to me...

Sorry to be a bother but what do you use to open the drain of the VST??? Even with my readers on I cant see in there well enough. Didnt reach anything with any skinny screwdrivers I have and it...

Ok, will do, thanks

Not since last November

Ok, so I looked under the hood and found gas sitting in this cap (port side). When touching the cap, gas ran down the side at a pretty good clip.

Regardless of what this is (even if some think...

2010 Pro XS 250, 390 total hours, 40 on rebuilt powerhead and a new compressor. Serial # 1B827034. In November a shop found and replaced a "leaking fuel line into fuel rail".

Was running fine all...

Good idea, I'll have to grab one of my boys and go check that out.

Here's an update:
Connected Vessel view and phone app. I went to a lake early today and did some playing around. At low to mid...

Manual. I did that last season in a prior thread. If I recall I am about 3 1/4". The rebuild was done right before I bough the boat - I had to do the break in. It had a 225 on it and the dealer had...

Sorry about that! Serial # on sale paperwork says 1B827034. Hopefully thats what you are looking for. Prop was sent out for reconditioning this spring and to me looks 'like new'. Here's an update:
...

Bringing this over from another thread.....

Purchased and '08 Cougar with '10 250 Pro XS last year. (Under 40 hours on the rebuild) I was getting 68mph at 6k rpm. Motor started acting funny late...

Thanks for all the replies so far! Just to restate, its the same prop and setup that did 68mph last year (two guys, tournament loaded). Trying to wrap my head around why a prop change would matter...

Not sure I understand....first line says line is not ethanol resistant, second line says they all are. What am I missing? Also, what would this have to do with losing speed?

Fury 25

Connected Vessel View and watched rpm's on my phone app. Tach is very close. I'd say within 100 rpm across the spectrum. Raised the manual jackplate 1/4" and it made things worse. Didnt have time to...

Dash tach that came mounted in the boat. I guess analog since it certainly isnt digital/computerized. Just by the sound of the motor I would have to say its at least fairly accurate - the motor...

How would I know if the tach is wrong or not? GPS for speed

'08 Cougar with '10 250 Pro XS. (Under 40 hours on the rebuild) I was getting 68mph at 6k rpm. Motor was acting funny so I took it to a shop and they found a fuel line leak. They fixed that and...

Not sure if this has been covered, or if we even know yet, but will 360 Live be stand alone or packaged with 360 Mega where you can switch back and forth between functions?

I have all HB units...

Update:
Was able to get the boat into D&R Sports pretty quickly so I cancelled my appointment with the other shop. All they could find is that the skeg has a very slight bend to it and a couple...

Scheduled with Camp N Cruise, the local BC dealer. They will do both shop and on-water testing with it. Is there a reason you still suggest D&R instead? I am well aware of them but am concerned that...

Good info, I'll check it all out, thanks!

Ok, after a vacation etc here is an update:

The easy one - isolated which pump does the Pump In and found some fishing line got sucked in and must have burned the pump out. Ordered a new one and...

Thanks for the info. As listed in original post, its a Fury 25 prop. I leveled and remeasured and it is currently set at 3 1/2" (not 13 1/2) pad to center of prop. But if you suggest it I will lower...

Well thats a whole other story! Let's just say that this little dealer south of Nashville, TN will never see me or anyone I know ever again. I've already dropped a couple grand and still have issues....

Sorry, I mis-spoke about the 13 1/2 measurements, cant read my own handwritting on my notes from a few weeks ago. I'll remeasure and post here later.