I have a 1998 ZX195C and I went with the 45" and I fish Lake Michigan a lot. I have had no issues at all and when I fish shallower lakes I also don't have to raise it too much. My friend has a 52"...
Type: Posts; User: 1080tommy
I have a 1998 ZX195C and I went with the 45" and I fish Lake Michigan a lot. I have had no issues at all and when I fish shallower lakes I also don't have to raise it too much. My friend has a 52"...
Here is the fix for this problem. Again, I have a 1998 OX66 and the cowl was loose. So loose that there was too much play and the cowl hit the head causing that ding from the inside out. I know the...
I finally got this problem fixed!!! I was relieved to say the lease. I used rubber grommets and used the existing bolt. I did not have to pull the power head and it was a pretty easy fix. The thing...
I think they are broke off. It looks like there should be bushings under the nuts that are on the bottoms. How did you modify them???
i need to do something but I can’t find these parts anywhere....
Thanks. It looks like there are three bushings on the bottom pan. There are two in front and one I see in the back. The whole cowl moves really easy and it caused a ding on the top of the cowl....
Crap I forgot to put that in the post. Would probably be helpful. Sorry about that. It is a 1998 Yamaha 200 OX66 and it's on a 1998 Skeeter ZX195C. I think I can see the bushings on the bottom part...
I noticed what seemed like my motor moving quite a bit while I was trailering. It actualky produced a little ding on the cowl because it moved so much. I got a motormate and noticed the same thing...
Oh cool!!! I just now was thinking that!!! Thanks man!!!!
I got a 98 195 and have had it for the last few months!!! It is a great boat. I have basically your same setup. I have a 98 OX66 and it runs strong. It is a fast boat and I have not had any issues...
So here's a shot in the dark. I just bought a 1998 Skeeter ZX195C and the guy before me took the brakes off the trailer. I wanted to put them back on so I ordered the brake assemblies. I also decided...
Nice looking rig man!!!! Buglife!!!!
1998 ZC 195 C
200 Yamaha 0X66
Yamaha 25M
Helix 9
Helix 12
Minn Kota Maxxum 80lb soon to be Ultrex
I have only had her for a couple months and have not had her wot yet. I have hit 64.7 gps...
Sorry it took so long. I have been working on some wiring issues that I found and replacing the brakes and wheel bearings. Here are the pics. This is the area right in between the consoles. The port...
Haven’t had much time to post. I’ll get some pics up tomorrow! Sorry just been really busy.
Sorry I have not been on I have been working a lot lately. It's definitely a piece of the floor coming up. I am working out a resolution to the problem now. I will post once I have the fix determined...
There is a piece of carpet popping up between my consoles and it feels like a piece of the floor either separated from the main floor or a piece delaminated. Anyone run into this on theirs??? I will...
Thanks for the fast response. I will get her out and get some specifications for you and will send her in hopefully before next week. Thanks again!!!!!
Hi Mark, I have been wanting to send you a prop for a while and I think now is the time. I had a little issue and my prop got dinged up. Not real bad but enough that the edges are what I would...
Hi, I have a 91 Stratos 285 All Pro Spitfire with an 91 Evinrude 150 and dinged up my prop just a bit on the edges earlier this year. I noticed that the boat does not plane out since this happened...
Congrats! Awesome how that worked out!
Once I get this one I'm gonna have the other one b&b. probably worth it to have that done.
Ok cool. That's what I thought. Thanks for the reply. I think my next boat I will have the prop balanced and blue printed but for this one just getting the prop fixed will be good enough for me. The...
I actually found another raker in great shape. I am going to use it on the boat while I have the old one sent to Mark Croxton to have it Croxtonized. I also was wondering what advantages blueprinting...
I just purchased a raker prop for my boat because the one on the boat was dinged up slightly. I was looking at Mark Croxton's price list and was wondering what does blueprinting the prop consist of....
Cool. Definitely let me know what you would want for it because if you had mark already work on it I'll take it and then could send my other one in to him to have that one for a spare.
Tom
