Search:

I had the same situation with a nema port one time. If the male pin is broke out in the back of the unit, you can take an extra cable / connector, pull a pin out of it and manually put it in the...

Not sure about the quick attach/detach, but I did just as you are asking. When I sold my boat, I re-installed the console by just removing the sticker and re-drilling the epoxy and re-installing...

Removed mine as well from my 2010 Z8. As stated before, the 3 bolts in the front are easy to access behind the rod locker carpet, the bolts on the side are a pain. With a long skinny arm and a boxed...

Depends on the type of fishing you mostly do. I went with a 45" on my Z21 mainly due to the availablity and somtimes wish i had the 52" version due to the big water lakes I frequently fish. The 45"...

BMCD, That is exactly how my cover fits as well. Thanks for the quick reply!

BMCD, could you elaborate of securing it properly?

I have had two Dowco's for my last two boats, Z8 & Z21 both have been solid.

I lucked into one at BPS also, they were showing none in-stock but asked at the marine counter and they have two in the back. 112lb 45"

Same here, 2016 Z21 boat is equipped with a 24p Fury Prop, played with jack-plate height quiet a bit and 68-69mph is about all I can achieve. I have a 25p Tempest I kept off my Z8 and ill begin...

For use as a heading sensor I had to mount mine behind the drivers seat on the back deck. Mounted one originally on the left side of boat (opposite the remote oil fill) splash well area, just like I...

I have been in the Z21 for close to a year now. What I can say is this is a solid fishing rig. A lot of improvements over my older Z8 that I had. As far as the lid system leaking, I can say my...

This is a "Awesome" set-up. great product and great people to deal with.

CC

I took a 2' long piece of tubing, i forget the outside diameter, but it fits snuggly into the pump out hole. I hang my bag on the hydraulic steering bracket and put the hose in the bag, walk up and...