Try killing power to the network box. Or better yet to the entire electronics system if you're setup on a switch to do that. I lost target lock once and killing power to the system fixed it, haven't...
Type: Posts; User: plunker
Try killing power to the network box. Or better yet to the entire electronics system if you're setup on a switch to do that. I lost target lock once and killing power to the system fixed it, haven't...
Is your heading sensor powered and blue tooth connected? I have mine on a seperate switch and sometimes if I forget to turn it on I loose a couple target lock options until I turn it on.
Playing around with surface clutter is what can help reduce the double ping showing up in your digital depth.
The 165 is a 30 degree cone, so if you're looking to have more bottom detail in sharp breaking or rocky reefs, a model with narrower cone might be better.
Go to Chart Options>General>Cursor Data and make sure that's checked ON.
Decreased SI quality is almost always related to transducer placement and cable routing in my opinion. I have Solix on my boat and people that have Helix have commented how great mine looks compared...
VX cards are not compatible with Helix G1 units. Needs to be G3 or G4.
It will overite the file on the SD card with everything that is on the unit if you chose to export all.
On the flip side, the other unit your transferring to will only input new waypoints if it...
It might help if we knew exactly what areas you were interested in.
I just had one in the back of my truck with a 6'6" box and it just barely fit with the tailgate up.
Hi Everyone, looking for some suggestions on mounting a new style of trim tab on a boat that has some slight curve and contour on the back of my transom.
2002 Ranger 619, walleye boat 200 Opti.
...
I did a restore all defaults yesterday in my shed then everything paired up.
This absolutely works, this is by far the most underutilized fish catching feature there is. I don't use it a lot at 40 mph, more like 20 or 7 mph, but it definitely marks fish or structure...
Use the cursor on 2D sonar to mark the fish, and the waypoint will show up back in history where they actually were.
I've fished out of a few coastal boats with seadeck and really like the way it fishes with just the right amount and cushion on the feet and easy cleanup. My 2002 Ranger 619 could use fresh carpet in...
Got the rod locker done. Used 1/4" garolite. When I first finished and standing on the lid laying on concrete I wasn't overly impressed since there was flex still, but once I put it on the boat and...
It was a cheap blade so I'm not worried about the bandsaw. It was more so that it would take on a life of it's own, I'd start straight and it would start veering off to the left and was nearly...
How the heck do you cut this garolite stuff? I ran it through my band saw and it did not like that! Ha.
Last question I think before epoxying in the garolite. For bonding to the white gel coat lid and garolite, is 80 grit sandpaper rough enough to get a good bond between the two?
Pics488528488529
When I did get the rod locker off. I did find a bit of spider cracking 3 spots about 2" diameter each. Got the garolite sheeting, do you think I can go over the top of everything with the sheeting?...
Put them both in a computer and see if the folders and files are the same on your working card and his non working card.
You need a good gps signal for that to work the way you want. My guess is you don't have good gps signal in the garage. Start the unit in simulator mode, then you should be able to look at lakes and...
You will need to use the transducer offset to adjust for changing water levels using Autochart live, you'll have a range of +/- 10 feet to work with. Your first day on the water becomes your base...
Rojoguio, will this Urethane work? It's what the local Auto Value had. Working on collecting materials.483102
