PsuHntr, thanks for the heads up! Do you know if the water level is still dropping or is it starting to come back up? How may feet would you say it's down right now?
Type: Posts; User: ZX225
PsuHntr, thanks for the heads up! Do you know if the water level is still dropping or is it starting to come back up? How may feet would you say it's down right now?
Thank you, Meadows! That's exactly what I was looking for!
I'm going to Lake Anna in a month and will be staying on the private side and I have questions about boating on the lake. Are the canals no wake and are no wake zones marked? Is there a speed limit...
Got mine back today and was told it just needed the throttle cable adjusted. Hope yours is as easy.
I have a 2013 250 SHO doing the same thing. Shifts hard into gear as well. I have mine in the shop and I'm hoping to know what's wrong by Saturday.
Thanks for the replys. Just wanted to make sure that was normal.
I have a 04 225 hpdi on a skeeter zx225. At WOT (5700-5900rpm) I get about 15psi, but when I'm doing 4000-5000 rpm's I'm only seeing 8-10psi. The faster I go the more water pressure it seems I get....
I just pull them out of the box in put them in. Not sure if doing that is right or wrong.
I have a 04 zx225 and mine is only chipped on the port side. I did check my bolts and all seem to be tight.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sceetor »</TD></TR><TR><TD CLASS="quote">zx225 said he had the split on the jack plate at...
Today I ran it with full tanks of gas, 1 full livewell, and 2 200lb guys. I was running 5600-5800rpm doing 69-71mph Boat was a tad slower out of the hole and the prop would blow out when the bow...
My boat is a 04. I did have to send the old box and panel back.
I had the same problem 2 years ago. I called skeeter and they sent me a new power box and power panel. Solved the problem and haven't had any issues with it since. I installed both myself.
I could be wrong about the hole shot. I wont' know what it's really like with a heavy load until next weekend. I'll keep you posted.
I just bought a txp 26 for my 04 zx225 and ran it today for the first time. I was running a 27m before. With the 27m with just me and full tanks of gas I was seeing 70-73mph at 5600-5800rpm with...
Put the new plugs in. (#5's) Probably only ran the motor for 30min total yesterday and I checked the plugs today to see how they looked. They were black at the tips and had wet oil on them. They...
Thanks again dentguy for the help.
I'm going to order the new hotter plugs and see how things go. If they foul I'll take my boat back to the shop and have them adjust the oil pump.
Is BKR5EKU...
Thanks for the reply and you explained everything really well. I do idle around a lot do to all the no wake area's. I will stick with the NGK plugs, but I'm not sure If I should go to the hotter...
I have 2 questions here.
When I bought my boat which was used the guy who had it before me was running Champion RC12YC plugs in it. The last 2 years I've been using NGK BKR6EKU plugs. Is one of...
Yea the have the blue indicators. I just had my trailer serviced over the winter by my dealer. So I probably need to add more grease now?
Just drove home from a 75 mile trip. When I was unhooking my boat I noticed that one of the tires had grease all over it and on the rim. Does this mean I broke a bearing?
This has happen to me a few times now. From what I've been told and read the gauges break over the winter when the water freezes in the water line and inside the gauge. The only thing you can do is...
One other thing. After I put the prop on there is only probably 1\16 of an inch of grooved prop shaft sticking out of the prop if that. It's probably more like 1\32 sticking out.
Is there...
This is what I had and still have after the work was done:
The big forward thrust washer goes on first. (Which I did check today and you were right only can go on one way.) Then I slide the prop...